2841 console commands for Portal
- +alt1
- +alt2
- +attack
- +attack2
- +back
- +break
- +camdistance
- +camin
- +cammousemove
- +camout
- +campitchdown
- +campitchup
- +camyawleft
- +camyawright
- +commandermousemove
- +demoui2 // Bring the advanced demo player UI (demoui2) to foreground.
- +duck
- +forward
- +graph
- +grenade1
- +grenade2
- +jlook
- +jump
- +klook
- +left
- +lookdown
- +lookup
- +mat_texture_list
- +movedown
- +moveleft
- +moveright
- +moveup
- +posedebug // Turn on pose debugger or add ents to pose debugger UI
- +reload
- +right
- +score
- +showbudget
- +showbudget_texture
- +showbudget_texture_global
- +showscores
- +showvprof
- +speed
- +strafe
- +use
- +vgui_drawtree
- +voicerecord
- +walk
- +zoom
- -alt1
- -alt2
- -attack
- -attack2
- -back
- -break
- -camdistance
- -camin
- -cammousemove
- -camout
- -campitchdown
- -campitchup
- -camyawleft
- -camyawright
- -commandermousemove
- -demoui2 // Send the advanced demo player UI (demoui2) to background.
- -duck
- -forward
- -graph
- -grenade1
- -grenade2
- -jlook
- -jump
- -klook
- -left
- -lookdown
- -lookup
- -mat_texture_list
- -movedown
- -moveleft
- -moveright
- -moveup
- -posedebug // Turn off pose debugger or hide ents from pose debugger UI
- -reload
- -right
- -score
- -showbudget
- -showbudget_texture
- -showbudget_texture_global
- -showscores
- -showvprof
- -speed
- -strafe
- -use
- -vgui_drawtree
- -voicerecord
- -walk
- -zoom
- achievement_debug "0" // Turn on achievement debug msgs.
- addip // Add an IP address to the ban list.
- adsp_alley_min "122"
- adsp_courtyard_min "126"
- adsp_debug "0"
- adsp_door_height "112"
- adsp_duct_min "106"
- adsp_hall_min "110"
- adsp_low_ceiling "108"
- adsp_opencourtyard_min "126"
- adsp_openspace_min "130"
- adsp_openstreet_min "118"
- adsp_openwall_min "130"
- adsp_room_min "102"
- adsp_street_min "118"
- adsp_tunnel_min "114"
- adsp_wall_height "128"
- ainet_generate_report // Generate a report to the console.
- ainet_generate_report_only // Generate a report to the console.
- airboat_fatal_stress "5000" // Amount of stress in kg that would kill the airboat driver.
- airboat_joy_response_move "1"
- air_density // Changes the density of air for drag computations.
- ai_actbusy_search_time "10"
- ai_ally_manager_debug "0"
- ai_auto_contact_solver "1"
- ai_block_damage "0"
- ai_citizen_debug_commander "1"
- ai_clear_bad_links // Clears bits set on nav links indicating link is unusable
- ai_debugscriptconditions "0"
- ai_debug_actbusy "0" // Used to debug actbusy behavior. Usage: 1: Constantly draw lines from NPCs to the actbusy nodes theyve chosen to actbusy at. 2:
- ai_debug_assault "0"
- ai_debug_avoidancebounds "0"
- ai_debug_directnavprobe "0"
- ai_debug_doors "0"
- ai_debug_dyninteractions "0" // Debug the NPC dynamic interaction system.
- ai_debug_efficiency "0"
- ai_debug_enemies "0"
- ai_debug_enemyfinders "0"
- ai_debug_eventresponses "0" // and which NPCs choose to respond to them.
- ai_debug_expressions "0" // Show random expression decisions for NPCs.
- ai_debug_follow "0"
- ai_debug_loners "0"
- ai_debug_looktargets "0"
- ai_debug_los "0" // itl
- ai_debug_nav "0"
- ai_debug_node_connect // Debug the attempted connection between two nodes
- ai_debug_ragdoll_magnets "0"
- ai_debug_readiness "0"
- ai_debug_shoot_positions "0"
- ai_debug_speech "0"
- ai_debug_squads "0"
- ai_debug_think_ticks "0"
- ai_default_efficient "0"
- ai_disable // Bi-passes all AI logic routines and puts all NPCs into their idle animations. Can be used to get NPCs out of your way and to t
- ai_drawbattlelines "0"
- ai_drop_hint // Drop an ai_hint at the players current eye position.
- ai_dump_hints
- ai_efficiency_override "0"
- ai_ef_hate_npc_duration "1"
- ai_ef_hate_npc_frequency "5"
- ai_enable_fear_behavior "1"
- ai_expression_frametime "0" // Maximum frametime to still play background expressions.
- ai_expression_optimization "0" // Disable npc background expressions when you cant see them.
- ai_fear_player_dist "720"
- ai_find_lateral_cover "1"
- ai_find_lateral_los "1"
- ai_follow_move_commands "1"
- ai_follow_use_points "1"
- ai_follow_use_points_when_moving "1"
- ai_force_serverside_ragdoll "0"
- ai_frametime_limit "50" // frametime limit for min efficiency AIE_NORMAL (in secs).
- ai_hull // Controls which connections are shown when ai_show_hull or ai_show_connect commands are used Arguments: NPC name or classname,
- ai_inhibit_spawners "0"
- ai_lead_time "0"
- ai_LOS_mode "0"
- ai_moveprobe_debug "0"
- ai_moveprobe_jump_debug "0"
- ai_moveprobe_usetracelist "0"
- ai_navigator_generate_spikes "0"
- ai_navigator_generate_spikes_strength "8"
- ai_newgroundturret "0"
- ai_new_aiming "1"
- ai_next_hull // Cycles through the various hull sizes. Currently selected hull size is written to the screen. Controls which connections are
- ai_nodes // Toggles node display. First call displays the nodes for the given network as green objects. Second call displays the nodes a
- ai_norebuildgraph "0"
- ai_no_local_paths "0"
- ai_no_node_cache "0"
- ai_no_select_box "0"
- ai_no_steer "0"
- ai_no_talk_delay "0"
- ai_path_adjust_speed_on_immediate_turns "1"
- ai_path_insert_pause_at_est_end "1"
- ai_path_insert_pause_at_obstruction "1"
- ai_post_frame_navigation "0"
- ai_radial_max_link_dist "512"
- ai_reaction_delay_alert "0"
- ai_reaction_delay_idle "0"
- ai_readiness_decay "120"
- ai_rebalance_thinks "1"
- ai_report_task_timings_on_limit "0"
- ai_resume // If NPC is stepping through tasks (see ai_step ) will resume normal processing.
- ai_sequence_debug "0"
- ai_setupbones_debug "0" // Shows that bones that are setup every think
- ai_set_move_height_epsilon // Set how high AI bumps up ground walkers when checking steps
- ai_shot_bias "1"
- ai_shot_bias_max "1"
- ai_shot_bias_min "-1"
- ai_shot_stats "0"
- ai_shot_stats_term "1000"
- ai_show_connect // Displays the allowed connections between each node for the currently selected hull type. Hulls are color code as follows: Gre
- ai_show_connect_fly // Displays the allowed connections between each node for the currently selected hull type. Hulls are color code as follows: Gre
- ai_show_connect_jump // Displays the allowed connections between each node for the currently selected hull type. Hulls are color code as follows: Gre
- ai_show_graph_connect // Toggles graph connection display for the node that the player is looking at. Nodes that are connected to the selected node by
- ai_show_grid // Draw a grid on the floor where looking.
- ai_show_hints // Displays all hints as small boxes Blue - hint is available for use Red - hint is currently being used by an NPC Orange -
- ai_show_hull // Displays the allowed hulls between each node for the currently selected hull type. Hulls are color code as follows: Green -
- ai_show_hull_attacks "0"
- ai_show_node // Highlight the specified node
- ai_show_think_tolerance "0"
- ai_show_visibility // Toggles visibility display for the node that the player is looking at. Nodes that are visible from the selected node will be d
- ai_simulate_task_overtime "0"
- ai_spread_cone_focus_time "0"
- ai_spread_defocused_cone_multiplier "3"
- ai_spread_pattern_focus_time "0"
- ai_step // use ai_step again. To resume processing no
- ai_strong_optimizations "0"
- ai_strong_optimizations_no_checkstand "0"
- ai_task_pre_script "0"
- ai_test_los // Test AI LOS from the players POV
- ai_test_moveprobe_ignoresmall "0"
- ai_think_limit_label "0"
- ai_use_clipped_paths "1"
- ai_use_efficiency "1"
- ai_use_frame_think_limits "1"
- ai_use_readiness "1"
- ai_use_think_optimizations "1"
- ai_use_visibility_cache "1"
- ai_vehicle_avoidance "1"
- alias // Alias a command.
- alyx_darkness_force "0"
- anim_3wayblend "1" // Toggle the 3-way animation blending code.
- anim_showmainactivity "0" // and/or sprint activities.
- antlion_easycrush "1"
- askconnect_accept // Accept a redirect request by the server.
- async_allow_held_files "1" // Allow AsyncBegin/EndRead()
- async_mode "0" // 1 = synchronous)
- async_resume
- async_serialize "0" // Force async reads to serialize for profiling
- async_simulate_delay "0" // Simulate a delay of up to a set msec per file operation
- async_suspend
- audit_save_in_memory // Audit the memory usage and files in the save-to-memory system
- autoaim_max_deflect "0"
- autoaim_max_dist "2160"
- autoaim_unlock_target "0"
- autosave // Autosave
- autosavedangerous // AutoSaveDangerous
- autosavedangerousissafe
- banid // Add a user ID to the ban list.
- banip // Add an IP address to the ban list.
- benchframe // Takes a snapshot of a particular frame in a time demo.
- bench_end // Ends gathering of info.
- bench_showstatsdialog // Shows a dialog displaying the most recent benchmark results.
- bench_start // Starts gathering of info. Arguments: filename to write results into
- bench_upload // Uploads most recent benchmark stats to the Valve servers.
- bind // Bind a key.
- binds_per_command "1"
- BindToggle // Performs a bind <key> increment var <cvar> 0 1 1
- bind_mac // not win32
- birds_debug "0"
- blink_duration "0" // How many seconds an eye blink will last.
- bloodspray // blood
- bot_mimic "0" // Bot uses usercmd of player by index.
- box // Draw a debug box.
- breakable_disable_gib_limit "0"
- breakable_multiplayer "1"
- buddha // Toggle. Player takes damage but wont die. (Shows red cross when health is zero)
- budget_averages_window "30" // number of frames to look at when figuring out average frametimes
- budget_background_alpha "128" // how translucent the budget panel is
- budget_bargraph_background_alpha "128" // how translucent the budget panel is
- budget_bargraph_range_ms "16" // budget bargraph range in milliseconds
- budget_history_numsamplesvisible "100" // number of samples to draw in the budget history window. The lower the better as far as rendering overhead of the budget panel
- budget_history_range_ms "66" // budget history range in milliseconds
- budget_panel_bottom_of_history_fraction "0" // number between 0 and 1
- budget_panel_height "384" // height in pixels of the budget panel
- budget_panel_width "512" // width in pixels of the budget panel
- budget_panel_x "0" // number of pixels from the left side of the game screen to draw the budget panel
- budget_panel_y "50" // number of pixels from the top side of the game screen to draw the budget panel
- budget_peaks_window "30" // number of frames to look at when figuring out peak frametimes
- budget_show_averages "0" // enable/disable averages in the budget panel
- budget_show_history "1" // turn history graph off and on. . good to turn off on low end
- budget_show_peaks "1" // enable/disable peaks in the budget panel
- budget_toggle_group // Turn a budget group on/off
- bug // Show/hide the bug reporting UI.
- bugbait_distract_time "5"
- bugbait_grenade_radius "150"
- bugbait_hear_radius "2500"
- bugbait_radius "512"
- bugreporter_includebsp "1" // Include .bsp for internal bug submissions.
- bugreporter_uploadasync "0" // Upload attachments asynchronously
- bug_swap // Automatically swaps the current weapon for the bug bait and back again.
- buildcubemaps // Rebuild cubemaps.
- building_cubemaps "0"
- bulletspeed "6000"
- cache_print // cache_print [section] Print out contents of cache memory.
- cache_print_lru // cache_print_lru [section] Print out contents of cache memory.
- cache_print_summary // cache_print_summary [section] Print out a summary contents of cache memory.
- camortho // Switch to orthographic camera.
- cam_collision "1" // an attempt is made to keep the camera from passing though walls.
- cam_command "0"
- cam_idealdelta "4" // Controls the speed when matching offset to ideal angles in thirdperson view
- cam_idealdist "150"
- cam_idealdistright "0"
- cam_idealdistup "0"
- cam_ideallag "4" // Amount of lag used when matching offset to ideal angles in thirdperson view
- cam_idealpitch "0"
- cam_idealyaw "0"
- cam_showangles "0" // print viewangles/idealangles/cameraoffsets to the console.
- cam_snapto "0"
- cancelselect
- cast_hull // Tests hull collision detection
- cast_ray // Tests collision detection
- cc_captiontrace "1" // 2 = show in hud)
- cc_emit // Emits a closed caption
- cc_findsound // Searches for soundname which emits specified text.
- cc_flush // Flushes asyncd captions.
- cc_lang "0" // Current close caption language (emtpy = use game UI language)
- cc_linger_time "1" // Close caption linger time.
- cc_minvisibleitems "1" // Minimum number of caption items to show.
- cc_predisplay_time "0" // Close caption delay before showing caption.
- cc_random // Emits a random caption
- cc_sentencecaptionnorepeat "4" // How often a sentence can repeat.
- cc_showblocks // Toggles showing which blocks are pending/loaded async.
- cc_smallfontlength "300" // force usage of small font size.
- cc_subtitles "0" // wont help hearing impaired players).
- centerview
- changelevel // Change server to the specified map
- changelevel2 // Transition to the specified map in single player
- change_portalgun_linkage_id // Changes the portal linkage ID for the portal gun held by the commanding player.
- ch_createairboat // Spawn airboat in front of the player.
- ch_createjalopy // Spawn jalopy in front of the player.
- ch_createjeep // Spawn jeep in front of the player.
- clear // Clear all console output.
- clear_debug_overlays // clears debug overlays
- clientport "27005" // Host game client port
- closecaption "0" // Enable close captioning.
- cl_allowdownload "1" // Client downloads customization files
- cl_allowupload "1" // Client uploads customization files
- cl_anglespeedkey "0"
- cl_animationinfo // Hud element to examine.
- cl_backspeed "450"
- cl_bob "0"
- cl_bobcycle "0"
- cl_bobup "0"
- cl_burninggibs "0" // A burning player that gibs has burning gibs.
- cl_chatfilters "63" // Stores the chat filter settings
- cl_class "0" // Default class when joining a game
- cl_clearhinthistory // Clear memory of client side hints displayed to the player.
- cl_clockdrift_max_ms "150" // Maximum number of milliseconds the clock is allowed to drift before the client snaps its clock to the servers.
- cl_clockdrift_max_ms_threadmode "0" // Maximum number of milliseconds the clock is allowed to drift before the client snaps its clock to the servers.
- cl_clock_correction "1" // Enable/disable clock correction on the client.
- cl_clock_correction_adjustment_max_amount "200" // Sets the maximum number of milliseconds per second it is allowed to correct the client clock. It will only correct this amount
- cl_clock_correction_adjustment_max_offset "90" // it moves towards apply
- cl_clock_correction_adjustment_min_offset "10" // then no clock correction is applied.
- cl_clock_correction_force_server_tick "999" // Force clock correction to match the server tick + this offset (-999 disables it).
- cl_clock_showdebuginfo "0" // Show debugging info about the clock drift.
- cl_cmdrate "30" // Max number of command packets sent to server per second
- cl_customsounds "0" // Enable customized player sound playback
- cl_debugrumble "0" // Turn on rumble debugging spew
- cl_demoviewoverride "0" // Override view during demo playback
- cl_detaildist "1200" // Distance at which detail props are no longer visible
- cl_detailfade "400" // Distance across which detail props fade in
- cl_detail_multiplier "1" // extra details to create
- cl_disablehtmlmotd "0" // Disable HTML motds.
- cl_downloadfilter "0" // nosounds)
- cl_drawhud "1" // Enable the rendering of the hud
- cl_drawleaf "-1"
- cl_drawmaterial "0" // Draw a particular material over the frame
- cl_drawmonitors "1"
- cl_drawshadowtexture "0"
- cl_draw_airboat_wake "1"
- cl_dump_particle_stats // dump particle profiling info to particle_profile.csv
- cl_ejectbrass "1"
- cl_energy_ball_start_fade_time "8"
- cl_entityreport "0" // draw entity states to console
- cl_entityreport_sorted "0" // 3 = peak
- cl_ent_absbox // Displays the clients absbox for the entity under the crosshair.
- cl_ent_bbox // Displays the clients bounding box for the entity under the crosshair.
- cl_ent_rbox // Displays the clients render box for the entity under the crosshair.
- cl_extrapolate "1" // Enable/disable extrapolation if interpolation history runs out.
- cl_extrapolate_amount "0" // Set how many seconds the client will extrapolate entities for.
- cl_fastdetailsprites "1" // whether to use new detail sprite system
- cl_fasttempentcollision "5"
- cl_find_ent // Find and list all client entities with classnames that contain the specified substring. Format: cl_find_ent <substring>
- cl_find_ent_index // Display data for clientside entity matching specified index. Format: cl_find_ent_index <index>
- cl_flushentitypacket "0" // For debugging. Force the engine to flush an entity packet.
- cl_forcepreload "0" // Whether we should force preloading.
- cl_forwardspeed "450"
- cl_fullupdate // Forces the server to send a full update packet
- cl_idealpitchscale "0"
- cl_ignorepackets "0" // Force client to ignore packets (for debugging).
- cl_interp "0" // Sets the interpolation amount (bounded on low side by server interp ratio settings).
- cl_interp_all "0" // Disable interpolation list optimizations.
- cl_interp_npcs "0" // if greater)
- cl_interp_ratio "2" // Sets the interpolation amount (final amount is cl_interp_ratio / cl_updaterate).
- cl_interp_threadmodeticks "0" // Additional interpolation ticks to use when interpolating with threaded engine mode set.
- cl_jiggle_bone_debug "0" // Display physics-based jiggle bone debugging information
- cl_jiggle_bone_debug_pitch_constraints "0" // Display physics-based jiggle bone debugging information
- cl_jiggle_bone_debug_yaw_constraints "0" // Display physics-based jiggle bone debugging information
- cl_lagcompensation "1" // Perform server side lag compensation of weapon firing events.
- cl_language "0" // Language (from HKCUSoftwareValveSteamLanguage)
- cl_leveloverview "0"
- cl_leveloverviewmarker "0"
- cl_localnetworkbackdoor "1" // Enable network optimizations for single player games.
- cl_logofile "0" // Spraypoint logo decal.
- cl_maxrenderable_dist "3000" // Max distance from the camera at which things will be rendered
- cl_mouseenable "1"
- cl_mouselook "1" // 0 for keyboard look. Cannot be set while connected to a server.
- cl_new_impact_effects "0"
- cl_npc_speedmod_intime "0"
- cl_npc_speedmod_outtime "1"
- cl_observercrosshair "1"
- cl_overdraw_test "0"
- cl_panelanimation // Shows panel animation variables: <panelname | blank for all panels>.
- cl_particleeffect_aabb_buffer "2" // it wont have to be reinserted as oft
- cl_particles_dump_effects
- cl_particles_show_bbox "0"
- cl_particle_batch_mode "1"
- cl_particle_max_count "0"
- cl_particle_retire_cost "0"
- cl_pclass "0" // Dump entity by prediction classname.
- cl_pdump "-1" // Dump info about this entity to screen.
- cl_phys_props_enable "1" // Disable clientside physics props (must be set before loading a level).
- cl_phys_props_max "300" // Maximum clientside physic props
- cl_phys_props_respawndist "1500" // Minimum distance from the player that a clientside prop must be before its allowed to respawn.
- cl_phys_props_respawnrate "60" // between clientside prop respawns.
- cl_phys_timescale "1" // Sets the scale of time for client-side physics (ragdolls)
- cl_pitchdown "89"
- cl_pitchspeed "225" // Client pitch speed.
- cl_pitchup "89"
- cl_playback_screenshots "0" // Allows the client to playback screenshot and jpeg commands in demos.
- cl_playermodel "0" // Default Player Model
- cl_playerspraydisable "0" // Disable player sprays.
- cl_portalgun_beam_size "0"
- cl_portalgun_effects_max_alpha "128"
- cl_portalgun_effects_min_alpha "96"
- cl_portalgun_effects_min_size "3"
- cl_precacheinfo // Show precache info (client).
- cl_predict "1" // Perform client side prediction.
- cl_predictionlist "0" // Show which entities are predicting
- cl_predictweapons "1" // Perform client side prediction of weapon effects.
- cl_pred_optimize "2" // and also for not repredicting if there were no errors (2)
- cl_pred_track // for field fieldname.
- cl_ragdoll_collide "0"
- cl_removedecals // Remove the decals from the entity under the crosshair.
- cl_reorient_in_air "1" // Allows the player to only reorient from being upside down while in the air.
- cl_resend "6" // Delay in seconds before the client will resend the connect attempt
- cl_rumblescale "1" // Scale sensitivity of rumble effects (0 to 1.0)
- cl_screenshotname "0" // Custom Screenshot name
- cl_SetupAllBones "0"
- cl_shadowtextureoverlaysize "256"
- cl_showbattery "0" // Draw current battery level at top of screen when on battery power
- cl_ShowBoneSetupEnts "0" // Show which entities are having their bones setup each frame.
- cl_showdemooverlay "0" // -1 - show always)
- cl_showents // Dump entity list to console.
- cl_showerror "0" // 2 for above plus detailed field deltas.
- cl_showevents "0" // Print event firing info in the console
- cl_showfps "0" // 2 = smooth fps)
- cl_showhelp "1" // Set to 0 to not show on-screen help
- cl_showpausedimage "1" // Show the Paused image when game is paused.
- cl_showpluginmessages "1" // Allow plugins to display messages to you
- cl_showpos "0" // Draw current position at top of screen
- cl_ShowSunVectors "0"
- cl_showtextmsg "1" // Enable/disable text messages printing on the screen.
- cl_show_splashes "1"
- cl_sidespeed "450"
- cl_smooth "1" // Smooth view/eye origin after prediction errors
- cl_smoothtime "0" // Smooth clients view after prediction error over this many seconds
- cl_soundemitter_flush // Flushes the sounds.txt system (client only)
- cl_soundfile "0" // Jingle sound file.
- cl_soundscape_flush // Flushes the client side soundscapes
- cl_soundscape_printdebuginfo // print soundscapes
- cl_spec_mode "1" // spectator mode
- cl_spewscriptintro "0"
- cl_sporeclipdistance "512"
- cl_starfield_diameter "128"
- cl_starfield_distance "256"
- cl_sun_decay_rate "0"
- cl_team "0" // Default team when joining a game
- cl_threaded_bone_setup "0" // Enable parallel processing of C_BaseAnimating::SetupBones()
- cl_threaded_client_leaf_system "0"
- cl_timeout "30" // the client will disconnect itself
- cl_updaterate "20" // Number of packets per second of updates you are requesting from the server
- cl_upspeed "320"
- cl_view // Set the view entity index.
- cl_voice_filter "0" // Filter voice by name substring
- cl_winddir "0" // Weather effects wind direction angle
- cl_windspeed "0" // Weather effects wind speed scalar
- cl_yawspeed "210" // Client yaw speed.
- cmd // Forward command to server.
- collision_shake_amp "0"
- collision_shake_freq "0"
- collision_shake_time "0"
- collision_test // Tests collision system
- colorcorrectionui // Show/hide the color correction tools UI.
- combine_guard_spawn_health "1"
- combine_spawn_health "1"
- commentary "0" // Desired commentary mode state.
- commentary_available "0" // Automatically set by the game when a commentary file is available for the current map.
- commentary_cvarsnotchanging
- commentary_finishnode
- commentary_firstrun "0"
- commentary_showmodelviewer // Display the commentary model viewer. Usage: commentary_showmodelviewer <model name> <optional attached model name>
- commentary_testfirstrun
- condump // dump the text currently in the console to condumpXX.log
- connect // Connect to specified server.
- contimes "8" // Number of console lines to overlay for debugging.
- con_drawnotify "1" // Disables drawing of notification area (for taking screenshots).
- con_enable "0" // Allows the console to be activated.
- con_filter_enable "0" // 2 displays filtered text brighter than ot
- con_filter_text "0" // Text with which to filter console spew. Set con_filter_enable 1 or 2 to activate.
- con_filter_text_out "0" // Text with which to filter OUT of console spew. Set con_filter_enable 1 or 2 to activate.
- con_logfile "0" // Console output gets written to this file
- con_notifytime "8" // How long to display recent console text to the upper part of the game window
- con_nprint_bgalpha "50" // Con_NPrint background alpha.
- con_nprint_bgborder "5" // Con_NPrint border size.
- con_timestamp "0" // Prefix console.log entries with timestamps
- con_trace "0" // Print console text to low level printout.
- coop "0" // Cooperative play.
- CreateHairball
- create_flashlight
- creditsdone
- creditsdone
- crosshair "1"
- curve_bias "0"
- cvarlist // Show the list of convars/concommands.
- c_maxdistance "200"
- c_maxpitch "90"
- c_maxyaw "135"
- c_mindistance "30"
- c_minpitch "0"
- c_minyaw "-135"
- c_orthoheight "100"
- c_orthowidth "100"
- darkness_ignore_LOS_to_sources "1"
- datacachesize "32" // Size in MB.
- dbghist_addline // Add a line to the debug history. Format: <category id> <line>
- dbghist_dump // Dump the debug history to the console. Format: <category id> Categories: 0: Entity I/O 1: AI Decisions 2: Sc
- deathmatch "0" // Running a deathmatch server.
- debugsystemui // Show/hide the debug system UI.
- debug_fixmyposition // Runs FindsClosestPassableSpace() on player.
- debug_materialmodifycontrol "0"
- debug_materialmodifycontrol_client "0"
- debug_physimpact "0"
- debug_touchlinks "0" // Spew touch link activity
- decalfrequency "10"
- default_fov "75"
- demolist // Print demo sequence list.
- demos // Demo demo file sequence.
- demoui // Show/hide the demo player UI.
- demoui2 // Show/hide the advanced demo player UI (demoui2).
- demo_avellimit "2000" // Angular velocity limit before eyes considered snapped for demo playback.
- demo_debug "0" // Demo debug info.
- demo_fastforwardfinalspeed "20" // Go this fast when starting to hold FF button.
- demo_fastforwardramptime "5" // How many seconds it takes to get to full FF speed.
- demo_fastforwardstartspeed "2" // Go this fast when starting to hold FF button.
- demo_gototick // Skips to a tick in demo.
- demo_interplimit "4000" // How much origin velocity before its considered to have teleported causing interpolation to reset.
- demo_interpolateview "1" // Do view interpolation during dem playback.
- demo_legacy_rollback "1" // Use legacy view interpolation rollback amount in demo playback.
- demo_pause // Pauses demo playback.
- demo_pauseatservertick "0" // Pauses demo playback at server tick
- demo_quitafterplayback "0" // Quits game after demo playback.
- demo_recordcommands "1" // Record commands typed at console into .dem files.
- demo_resume // Resumes demo playback.
- demo_setendtick // Sets end demo playback tick. Set to 0 to disable.
- demo_timescale // Sets demo replay speed.
- demo_togglepause // Toggles demo playback.
- developer "0" // Set developer message level
- devshots_nextmap // Used by the devshots system to go to the next map in the devshots maplist.
- devshots_screenshot // use the screenshot command instead.
- differences // Show all convars which are not at their default values.
- disconnect // Disconnect game from server.
- dispcoll_drawplane "0"
- displayportalplayerstats // and seconds taken.
- displaysoundlist "0"
- disp_dynamic "0"
- dlight_debug // Creates a dlight in front of the player
- dog_debug "0"
- dog_max_wait_time "7"
- download_debug "0"
- drawcross // Draws a cross at the given location Arguments: x y z
- drawline // Draws line between two 3D Points. Green if no collision Red is collides with something Arguments: x1 y1 z1 x2 y2 z2
- dropprimary // dropprimary: Drops the primary weapon of the player.
- dsp_automatic "0"
- dsp_db_min "80"
- dsp_db_mixdrop "0"
- dsp_dist_max "1440"
- dsp_dist_min "0"
- dsp_enhance_stereo "0"
- dsp_facingaway "0"
- dsp_mix_max "0"
- dsp_mix_min "0"
- dsp_off "0"
- dsp_player "0"
- dsp_reload
- dsp_room "0"
- dsp_slow_cpu "0"
- dsp_spatial "40"
- dsp_speaker "50"
- dsp_volume "1"
- dsp_vol_2ch "1"
- dsp_vol_4ch "0"
- dsp_vol_5ch "0"
- dsp_water "14"
- dti_flush // Write out the datatable instrumentation files (you must run with -dti for this to work).
- dtwarning "0" // Print data table warnings?
- dtwatchclass "0" // Watch all fields encoded with this table.
- dtwatchent "-1" // Watch this entities data table encoding.
- dtwatchvar "0" // Watch the named variable.
- dt_ShowPartialChangeEnts "0" // (SP only) - show entities that were copied using small optimized lists (FL_EDICT_PARTIAL_CHANGE).
- dt_UsePartialChangeEnts "1" // (SP only) - enable FL_EDICT_PARTIAL_CHANGE optimization.
- dumpentityfactories // Lists all entity factory names.
- dumpeventqueue // Dump the contents of the Entity I/O event queue to the console.
- dumpgamestringtable // Dump the contents of the game string table to the console.
- dumpsavedir // List the contents of the save directory in memory
- dumpstringtables // Print string tables to console.
- dump_entity_sizes // Print sizeof(entclass)
- dump_globals // Dump all global entities/states
- dump_panels // Dump Panel Tree
- dump_x360_cfg // Dump X360 config files to disk
- dump_x360_saves // Dump X360 save games to disk
- echo // Echo text to console.
- editdemo // Edit a recorded demo file (.dem ).
- editor_toggle // Disables the simulation and returns focus to the editor
- enable_debug_overlays "1" // Enable rendering of debug overlays
- endmovie // Stop recording movie frames.
- english "0" // running the english language set of assets.
- ent_absbox // Displays the total bounding box for the given entity(s) in green. Some entites will also display entity specific overlays. Ar
- ent_attachments // Displays the attachment points on an entity. Arguments: {entity_name} / {class_name} / no argument picks what player is loo
- ent_autoaim // Displays the entitys autoaim radius. Arguments: {entity_name} / {class_name} / no argument picks what player is looking at
- ent_bbox // Displays the movement bounding box for the given entity(ies) in orange. Some entites will also display entity specific overlay
- ent_cancelpendingentfires // Cancels all ent_fire created outputs that are currently waiting for their delay to expire.
- ent_create // Creates an entity of the given type where the player is looking.
- ent_create_portal_metal_sphere // Creates a reflective metal sphere where the player is looking.
- ent_create_portal_weight_box // Creates a weight box used in portal puzzles at the location the player is looking.
- ent_debugkeys "0"
- ent_dump // Usage: ent_dump <entity name>
- ent_fire // Usage: ent_fire <target> [action] [value] [delay]
- ent_info // Usage: ent_info <class name>
- ent_keyvalue // Applies the comma delimited key=value pairs to the entity with the given Hammer ID. Format: ent_keyvalue <entity id> <key1>=<v
- ent_messages // Toggles input/output message display for the selected entity(ies). The name of the entity will be displayed as well as any mes
- ent_messages_draw "0" // Visualizes all entity input/output activity.
- ent_name
- ent_orient // only orients target entitys YAW. Use the allangles opt
- ent_pause // Toggles pausing of input/output message processing for entities. When turned on processing of all message will stop. Any mess
- ent_pivot // Displays the pivot for the given entity(ies). (y=up=green, z=forward=blue, x=left=red). Arguments: {entity_name} / {class
- ent_rbox // Displays the total bounding box for the given entity(s) in green. Some entites will also display entity specific overlays. Ar
- ent_remove // Removes the given entity(s) Arguments: {entity_name} / {class_name} / no argument picks what player is looking at
- ent_remove_all // Removes all entities of the specified type Arguments: {entity_name} / {class_name}
- ent_rotate // Rotates an entity by a specified # of degrees
- ent_setname // Sets the targetname of the given entity(s) Arguments: {new entity name} {entity_name} / {class_name} / no argument picks wh
- ent_show_response_criteria // an entitys current criteria set used to select responses. Arguments: {entity_name} / {class_name} /
- ent_step // When ent_pause is set this will step through one waiting input / output message at a time.
- ent_teleport // Teleport the specified entity to where the player is looking. Format: ent_teleport <entity name>
- ent_text // Displays text debugging information about the given entity(ies) on top of the entity (See Overlay Text) Arguments: {entity_
- ent_viewoffset // Displays the eye position for the given entity(ies) in red. Arguments: {entity_name} / {class_name} / no argument picks wha
- envmap
- escape // Escape key pressed.
- exec // Execute script file.
- exit // Exit the engine.
- explode // Kills the player with explosive damage
- explodevector // Kills a player applying an explosive force. Usage: explodevector <player> <x value> <y value> <z value>
- fadein // fadein {time r g b}: Fades the screen in from black or from the specified color over the given number of seconds.
- fadeout // fadeout {time r g b}: Fades the screen to black or to the specified color over the given number of seconds.
- fast_fogvolume "0"
- filesystem_buffer_size "0" // Size of per file buffers. 0 for none
- find // Find concommands with the specified string in their name/help text.
- findflags // Find concommands by flags.
- find_ent // Find and list all entities with classnames or targetnames that contain the specified substring. Format: find_ent <substring>
- find_ent_index // Display data for entity matching specified index. Format: find_ent_index <index>
- firetarget
- fire_absorbrate "3"
- fire_dmgbase "1"
- fire_dmginterval "1"
- fire_dmgscale "0"
- fire_energy_ball // Fires a test energy ball out of your face
- fire_extabsorb "5"
- fire_extscale "12"
- fire_growthrate "1"
- fire_heatscale "1"
- fire_incomingheatscale "0"
- fire_maxabsorb "50"
- fire_rocket_projectile // Fires a rocket turret projectile from the players eyes for testing.
- firstperson // Switch to firstperson camera.
- fish_debug "0" // Show debug info for fish
- fish_dormant "0" // Turns off interactive fish behavior. Fish become immobile and unresponsive.
- flex_expression "0"
- flex_looktime "5"
- flex_maxawaytime "1"
- flex_maxplayertime "7"
- flex_minawaytime "0"
- flex_minplayertime "5"
- flex_rules "1" // Allow flex animation rules to run.
- flex_smooth "1" // Applies smoothing/decay curve to flex animation controller changes.
- flex_talk "0"
- flush // Flush unlocked cache memory.
- flush_locked // Flush unlocked and locked cache memory.
- fogui // Show/hide fog control UI.
- fog_color "-1"
- fog_colorskybox "-1"
- fog_enable "1"
- fog_enableskybox "1"
- fog_enable_water_fog "1"
- fog_end "-1"
- fog_endskybox "-1"
- fog_maxdensity "-1"
- fog_maxdensityskybox "-1"
- fog_override "0"
- fog_start "-1"
- fog_startskybox "-1"
- force_centerview
- fov // Change players FOV
- fov_desired "90" // Sets the base field-of-view.
- fps_max "300" // cannot be set while connected to a server.
- free_pass_peek_debug "0"
- fs_convert "1" // Allow Xbox 360 files to be generated at runtime
- fs_monitor_read_from_pack "0" // 2:Sync only
- fs_printopenfiles // Show all files currently opened by the engine.
- fs_report_sync_opens "0" // 2:Not during load
- fs_warning_level // Set the filesystem warning level.
- fs_warning_mode "0" // 2:Warn other threads
- func_breakdmg_bullet "0"
- func_breakdmg_club "1"
- func_breakdmg_explosive "1"
- func_break_max_pieces "15"
- func_break_reduction_factor "0"
- g15_dumpplayer // Spew player data.
- g15_reload // Reloads the Logitech G-15 Keyboard configs.
- g15_update_msec "250" // Logitech G-15 Keyboard update interval.
- gamemenucommand // Issue game menu command.
- gamerules_survival "0"
- gameui_activate // Shows the game UI
- gameui_allowescape // Escape key allowed to hide game UI
- gameui_allowescapetoshow // Escape key allowed to show game UI
- gameui_hide // Hides the game UI
- gameui_hide_dialog // asdf
- gameui_preventescape // Escape key doesnt hide game UI
- gameui_preventescapetoshow // Escape key doesnt show game UI
- gameui_show_dialog // Show an arbitrary Dialog.
- gameui_xbox "0"
- getpos // dump position and angles to the console
- give // Give item to player. Arguments: <item_name>
- givecurrentammo // Give a supply of ammo for current weapon..
- global_set // 2 = DEAD).
- gl_clear "0"
- gl_clear_randomcolor "0" // Clear the back buffer to random colors every frame. Helps spot open seams in geometry.
- god // Toggle. Player becomes invulnerable.
- groundlist // Display ground entity list <index>
- g_ai_citizen_show_enemy "0"
- g_antlionguard_hemorrhage "1" // guard will emit a bleeding particle effect when wounded.
- g_antlion_cascade_push "1"
- g_antlion_maxgibs "16"
- g_cannon_damageandradius "512"
- g_cannon_debug "0"
- g_cannon_max_traveltime "1"
- g_cannon_reloadtime "3"
- g_debug_angularsensor "0"
- g_debug_antlion "0"
- g_debug_antlionguard "0"
- g_debug_antlionmaker "0"
- g_debug_antlion_worker "0"
- g_debug_basehelicopter "0"
- g_debug_basescanner "0"
- g_debug_combine_camera "0"
- g_debug_constraint_sounds "0" // Enable debug printing about constraint sounds.
- g_debug_cscanner "0"
- g_debug_darkness "0" // Show darkness mode lightsources.
- g_debug_doors "0"
- g_debug_dropship "0"
- g_debug_dynamicresupplies "0" // Debug item_dynamic_resupply spawning. Set to 1 to see text printouts of the spawning. Set to 2 to see lines drawn to other item
- g_debug_gunship "0"
- g_debug_headcrab "0"
- g_debug_hopwire "0"
- g_debug_hunter_charge "0"
- g_debug_injured_follow "0"
- g_debug_npc_vehicle_roles "0"
- g_debug_physcannon "0"
- g_debug_ragdoll_removal "0"
- g_debug_ragdoll_visualize "0"
- g_debug_trackpather "0"
- g_debug_transitions "0" // Set to 1 and restart the map to be warned if the map has no trigger_transition volumes. Set to 2 to see a dump of all entities
- g_debug_turret "0"
- g_debug_turret_ceiling "0"
- g_debug_vehiclebase "0"
- g_debug_vehicledriver "0"
- g_debug_vehicleexit "0"
- g_debug_vehiclesound "0"
- g_debug_vortigaunt_aim "0"
- g_helicopter_bomb_danger_radius "120"
- g_helicopter_bullrush_bomb_enemy_distance "0"
- g_helicopter_bullrush_bomb_speed "850" // The maximum distance the player can be from the chopper before it stops firing
- g_helicopter_bullrush_bomb_time "10"
- g_helicopter_bullrush_distance "5000"
- g_helicopter_bullrush_mega_bomb_health "0" // Fraction of the health of the chopper before it mega-bombs
- g_helicopter_bullrush_shoot_height "650" // The maximum distance the player can be from the chopper before it stops firing
- g_helicopter_chargetime "2" // How much time we have to wait (on average) between the time we start hearing the charging sound + the chopper fires
- g_helicopter_idletime "3" // How much time we have to wait (on average) after we fire before we can charge up again
- g_helicopter_maxfiringdist "2500" // The maximum distance the player can be from the chopper before it stops firing
- g_jeepexitspeed "100"
- g_Language "0"
- g_ragdoll_fadespeed "600"
- g_ragdoll_important_maxcount "2"
- g_ragdoll_lvfadespeed "100"
- g_ragdoll_maxcount "8"
- g_test_new_antlion_jump "1"
- hammer_update_entity // Updates the entitys position/angles when in edit mode
- hammer_update_safe_entities // Updates entities in the map that can safely be updated (dont have parents or are affected by constraints). Also excludes entit
- hap_airboat_gun_mag "3"
- hap_damagescale_game "0"
- hap_HasDevice "0" // falcon is connected
- hap_jeep_cannon_mag "10"
- hap_melee_scale "0"
- hap_noclip_avatar_scale "0"
- hap_turret_mag "5"
- hap_ui_vehicles "1"
- heartbeat // Force heartbeat of master servers
- help // Find help about a convar/concommand.
- hideconsole // Hide the console.
- hidehud "0"
- hidepanel // Hides a viewport panel <name>
- hl2_darkness_flashlight_factor "1"
- hl2_episodic "1"
- hl2_normspeed "190"
- hl2_sprintspeed "320"
- hl2_walkspeed "150"
- hopwire_hopheight "400"
- hopwire_strider_hits "1"
- hopwire_strider_kill_dist_h "300"
- hopwire_strider_kill_dist_v "256"
- hopwire_trap "1"
- hopwire_vortex "0"
- hostip "0" // Host game server ip
- hostname "0" // Hostname for server.
- hostport "27015" // Host game server port
- host_flush_threshold "20" // Memory threshold below which the host should flush caches between server instances
- host_framerate "0" // Set to lock per-frame time elapse.
- host_limitlocal "0" // Apply cl_cmdrate and cl_updaterate to loopback connection
- host_map "0" // Current map name.
- host_profile "0"
- host_runofftime // Run off some time without rendering/updating sounds
- host_showcachemiss "0" // Print a debug message when the client or server cache is missed.
- host_ShowIPCCallCount "0" // the # of IPC calls is shown every frame.
- host_sleep "0" // Force the host to sleep a certain number of milliseconds each frame.
- host_speeds "0" // Show general system running times.
- host_thread_mode "0" // 2 == force)
- host_timescale "1" // Prescale the clock by this amount.
- host_writeconfig // Store current settings to config.cfg (or specified .cfg file).
- hud_airboathint_numentries "10"
- hud_autoaim_method "1"
- hud_autoaim_scale_icon "0"
- hud_autoreloadscript "0" // Automatically reloads the animation script each time one is ran
- hud_deathnotice_time "6"
- hud_drawhistory_time "5"
- hud_draw_active_reticle "0"
- hud_draw_fixed_reticle "0"
- hud_fastswitch "0"
- hud_freezecamhide "0" // Hide the HUD during freeze-cam
- hud_jeephint_numentries "10"
- hud_magnetism "0"
- hud_quickinfo "1"
- hud_quickinfo_swap "0"
- hud_reloadscheme // Reloads hud layout and animation scripts.
- hud_reticle_alpha_speed "700"
- hud_reticle_maxalpha "255"
- hud_reticle_minalpha "125"
- hud_reticle_scale "1"
- hud_saytext_time "12"
- hud_showemptyweaponslots "1" // Shows slots for missing weapons when recieving weapons out of order
- hud_takesshots "0" // Auto-save a scoreboard screenshot at the end of a map.
- hunter_allow_dissolve "1"
- hunter_allow_nav_jump "0"
- hunter_charge "1"
- hunter_charge_min_delay "10"
- hunter_charge_pct "25"
- hunter_charge_test "0"
- hunter_cheap_explosions "1"
- hunter_clamp_shots "1"
- hunter_disable_patrol "0"
- hunter_dodge_debug "0"
- hunter_dodge_warning "1"
- hunter_dodge_warning_cone "0"
- hunter_dodge_warning_width "180"
- hunter_first_flechette_delay "0"
- hunter_flechette_delay "0"
- hunter_flechette_explode_delay "2"
- hunter_flechette_max_concurrent_volleys "2"
- hunter_flechette_max_range "1200"
- hunter_flechette_min_range "100"
- hunter_flechette_speed "2000"
- hunter_flechette_test "0"
- hunter_flechette_volley_end_max_delay "2"
- hunter_flechette_volley_end_min_delay "1"
- hunter_flechette_volley_size "8"
- hunter_flechette_volley_start_max_delay "0"
- hunter_flechette_volley_start_min_delay "0"
- hunter_free_knowledge "10"
- hunter_hate_attached_striderbusters "1"
- hunter_hate_held_striderbusters "1"
- hunter_hate_held_striderbusters_delay "0"
- hunter_hate_held_striderbusters_tolerance "2000"
- hunter_hate_thrown_striderbusters "1"
- hunter_hate_thrown_striderbusters_tolerance "300"
- hunter_jostle_car_max_speed "600"
- hunter_jostle_car_min_speed "100"
- hunter_melee_delay "2"
- hunter_plant_adjust_z "12"
- hunter_random_expressions "0"
- hunter_retreat_striderbusters "1" // the hunter will retreat when a buster is glued to him.
- hunter_seek_thrown_striderbusters_tolerance "400"
- hunter_shoot_flechette // Fires a hunter flechette where the player is looking.
- hunter_show_weapon_los_condition "0"
- hunter_show_weapon_los_z "0"
- hunter_siege_frequency "12"
- hunter_stand_still "0"
- hurtme // Hurts the player. Arguments: <health to lose>
- impulse
- incrementvar // Increment specified convar value.
- injured_help_plee_range "256"
- invnext
- invprev
- in_usekeyboardsampletime "1" // Use keyboard sample time smoothing.
- ip "0" // Overrides IP for multihomed hosts
- jalopy_blocked_exit_max_speed "50"
- jalopy_cargo_anim_time "1"
- jalopy_radar_test_ent "0"
- joyadvancedupdate
- joystick "0"
- joy_accelmax "1"
- joy_accelscale "0"
- joy_accel_filter "0"
- joy_advanced "0"
- joy_advaxisr "0"
- joy_advaxisu "0"
- joy_advaxisv "0"
- joy_advaxisx "0"
- joy_advaxisy "0"
- joy_advaxisz "0"
- joy_autoaimdampen "0" // How much to scale user stick input when the gun is pointing at a valid target.
- joy_autoaimdampenrange "0" // The stick range where autoaim dampening is applied. 0 = off
- joy_autosprint "0" // Automatically sprint when moving with an analog joystick
- joy_axisbutton_threshold "0" // Analog axis range before a button press is registered.
- joy_diagonalpov "0" // too.
- joy_display_input "0"
- joy_forwardsensitivity "-1"
- joy_forwardthreshold "0"
- joy_inverty "0" // Whether to invert the Y axis of the joystick for looking.
- joy_inverty_default "0"
- joy_lowend "1"
- joy_lowmap "1"
- joy_movement_stick "0" // Which stick controls movement (0 is left stick)
- joy_movement_stick_default "0"
- joy_name "0"
- joy_pegged "0"
- joy_pitchsensitivity "1"
- joy_pitchsensitivity_default "-1"
- joy_pitchthreshold "0"
- joy_response_look "0" // 1=Acceleration Promotion
- joy_response_move "1" // 1/sensitivity
- joy_response_move_vehicle "6"
- joy_sidesensitivity "1"
- joy_sidethreshold "0"
- joy_vehicle_turn_lowend "0"
- joy_vehicle_turn_lowmap "0"
- joy_virtual_peg "0"
- joy_wingmanwarrior_centerhack "0" // Wingman warrior centering hack.
- joy_wingmanwarrior_turnhack "0" // Wingman warrior hack related to turn axes.
- joy_xcontroller_cfg_loaded "0" // the 360controller.cfg file will be executed on startup & option changes.
- joy_xcontroller_found "0" // Automatically set to 1 if an xcontroller has been detected.
- joy_yawsensitivity "-1"
- joy_yawsensitivity_default "-1"
- joy_yawthreshold "0"
- jpeg // Take a jpeg screenshot: jpeg <filename> <quality 1-100>.
- jpeg_quality "90" // jpeg screenshot quality.
- kdtree_test // Tests spatial partition for entities queries.
- key_findbinding // Find key bound to specified command string.
- key_listboundkeys // List bound keys with bindings.
- key_updatelayout // Updates game keyboard layout to current windows keyboard setting.
- kick // Kick a player by name.
- kickid // with a message.
- kill // Kills the player with generic damage
- killserver // Shutdown the server.
- killvector // Kills a player applying force. Usage: killvector <player> <x value> <y value> <z value>
- lastinv
- lightcache_maxmiss "2"
- lightprobe // Samples the lighting environment. Creates a cubemap and a file indicating the local lighting in a subdirectory called material
- light_crosshair // Show texture color at crosshair
- linefile // Parses map leak data from .lin file
- listdemo // List demo file contents.
- listid // Lists banned users.
- listip // List IP addresses on the ban list.
- listmodels // List loaded models.
- listRecentNPCSpeech // Displays a list of the last 5 lines of speech from NPCs.
- load // Load a saved game.
- loadcommentary
- lod_TransitionDist "800"
- log // and udp < on | off >.
- logaddress_add // Set address and port for remote host <ip:port>.
- logaddress_del // Remove address and port for remote host <ip:port>.
- logaddress_delall // Remove all udp addresses being logged to
- logaddress_list // List all addresses currently being used by logaddress.
- log_verbose_enable "0" // Set to 1 to enable verbose server log on the server.
- log_verbose_interval "3" // Determines the interval (in seconds) for the verbose server log.
- lookspring "0"
- lookstrafe "0"
- lservercfgfile "0"
- map // Start playing on specified map.
- mapcyclefile "0" // Name of the .txt file used to cycle the maps on multiplayer servers
- maps // Displays list of maps.
- map_background // Runs a map as the background to the main menu.
- map_commentary // on a specified map.
- map_edit
- map_noareas "0" // Disable area to area connection testing.
- matchmakingport "27025" // Host Matchmaking port
- mat_aaquality "0"
- mat_accelerate_adjust_exposure_down "3"
- mat_alphacoverage "1"
- mat_antialias "8"
- mat_autoexposure_max "2"
- mat_autoexposure_min "0"
- mat_bloomamount_rate "0"
- mat_bloomscale "1"
- mat_bloom_scalefactor_scalar "0"
- mat_bufferprimitives "1"
- mat_bumpbasis "0"
- mat_bumpmap "1"
- mat_camerarendertargetoverlaysize "128"
- mat_clipz "1"
- mat_colcorrection_disableentities "0" // Disable map color-correction entities
- mat_colorcorrection "1"
- mat_compressedtextures "1"
- mat_configcurrent // show the current video control panel config for the material system
- mat_crosshair // Display the name of the material under the crosshair
- mat_crosshair_edit // open the material under the crosshair in the editor defined by mat_crosshair_edit_editor
- mat_crosshair_explorer // open the material under the crosshair in explorer and highlight the vmt file
- mat_crosshair_printmaterial // print the material under the crosshair
- mat_crosshair_reloadmaterial // reload the material under the crosshair
- mat_debug // Activates debugging spew for a specific material.
- mat_debugalttab "0"
- mat_debugdepth "0"
- mat_debugdepthmode "0"
- mat_debugdepthval "128"
- mat_debugdepthvalmax "256"
- mat_debug_autoexposure "0"
- mat_debug_bloom "0"
- mat_debug_postprocessing_effects "0" // 2 = only apply post-processing to the centre of the screen
- mat_debug_process_halfscreen "0"
- mat_depthbias_decal "-262144"
- mat_depthbias_normal "0"
- mat_depthbias_shadowmap "0"
- mat_diffuse "1"
- mat_disablehwmorph "1" // Disables HW morphing for particular mods
- mat_disable_bloom "0"
- mat_disable_fancy_blending "0"
- mat_disable_lightwarp "0"
- mat_disable_ps_patch "0"
- mat_drawflat "0"
- mat_drawTexture "0" // Enable debug view texture
- mat_drawTextureScale "1" // Debug view texture scale
- mat_drawTitleSafe "0" // Enable title safe overlay
- mat_drawwater "1"
- mat_dxlevel "95"
- mat_dynamic_tonemapping "1"
- mat_edit // Bring up the material under the crosshair in the editor
- mat_envmapsize "128"
- mat_envmaptgasize "32"
- mat_excludetextures "0"
- mat_exposure_center_region_x "0"
- mat_exposure_center_region_x_flashlight "0"
- mat_exposure_center_region_y "0"
- mat_exposure_center_region_y_flashlight "0"
- mat_fastclip "0"
- mat_fastnobump "0"
- mat_fastspecular "1" // Enable/Disable specularity for visual testing. Will not reload materials and will not affect perf.
- mat_fillrate "0"
- mat_filterlightmaps "1"
- mat_filtertextures "1"
- mat_forceaniso "16"
- mat_forcedynamic "0"
- mat_forcehardwaresync "1"
- mat_forcemanagedtextureintohardware "0"
- mat_force_bloom "0"
- mat_force_ps_patch "0"
- mat_force_tonemap_scale "0"
- mat_framebuffercopyoverlaysize "128"
- mat_frame_sync_enable "1"
- mat_frame_sync_force_texture "0" // Force frame syncing to lock a managed texture.
- mat_fullbright "0"
- mat_hdr_enabled // Report if HDR is enabled for debugging
- mat_hdr_level "2" // and 2 for full HDR on HDR maps.
- mat_hdr_manual_tonemap_rate "1"
- mat_hdr_tonemapscale "1" // 16 = eyes wide open.
- mat_hdr_uncapexposure "0"
- mat_hsv "0"
- mat_info // Shows material system info
- mat_leafvis "0" // Draw wireframe of current leaf
- mat_levelflush "1"
- mat_lightmap_pfms "0" // Outputs .pfm files containing lightmap data for each lightmap page when a level exits.
- mat_loadtextures "1"
- mat_luxels "0"
- mat_maxframelatency "1"
- mat_max_worldmesh_vertices "65536"
- mat_measurefillrate "0"
- mat_mipmaptextures "1"
- mat_monitorgamma "2" // monitor gamma (typically 2.2 for CRT and 1.7 for LCD)
- mat_monitorgamma_tv_enabled "0"
- mat_monitorgamma_tv_exp "2"
- mat_monitorgamma_tv_range_max "255"
- mat_monitorgamma_tv_range_min "16"
- mat_morphstats "0"
- mat_motion_blur_enabled "1"
- mat_motion_blur_falling_intensity "1"
- mat_motion_blur_falling_max "20"
- mat_motion_blur_falling_min "10"
- mat_motion_blur_forward_enabled "0"
- mat_motion_blur_percent_of_screen_max "4"
- mat_motion_blur_rotation_intensity "1"
- mat_motion_blur_strength "1"
- mat_non_hdr_bloom_scalefactor "0"
- mat_norendering "0"
- mat_normalmaps "0"
- mat_normals "0"
- mat_parallaxmap "0"
- mat_picmip "-1"
- mat_postprocessing_combine "1" // software anti-aliasing and color correction into one post-processing pass
- mat_postprocess_x "4"
- mat_postprocess_y "1"
- mat_proxy "0"
- mat_queue_mode "0" // 1=queued sing
- mat_reducefillrate "0"
- mat_reduceparticles "0"
- mat_reloadallmaterials // Reloads all materials
- mat_reloadmaterial // Reloads a single material
- mat_reloadtextures // Reloads all textures
- mat_remoteshadercompile "0"
- mat_reporthwmorphmemory // Reports the amount of size in bytes taken up by hardware morph textures.
- mat_report_queue_status "0"
- mat_reversedepth "0"
- mat_savechanges // saves current video configuration to the registry
- mat_setvideomode // windowed state of the material system
- mat_shadowstate "1"
- mat_showcamerarendertarget "0"
- mat_showenvmapmask "0"
- mat_showframebuffertexture "0"
- mat_showlightmappage "-1"
- mat_showlowresimage "0"
- mat_showmaterials // Show materials.
- mat_showmaterialsverbose // Show materials (verbose version).
- mat_showmiplevels "0" // 1: everything else
- mat_showtextures // Show used textures.
- mat_showwatertextures "0"
- mat_show_ab_hdr "0"
- mat_show_ab_hdr_hudelement "0" // HDR Demo HUD Element toggle.
- mat_show_histogram "0"
- mat_show_texture_memory_usage "0" // Display the texture memory usage on the HUD.
- mat_slopescaledepthbias_decal "0"
- mat_slopescaledepthbias_normal "0"
- mat_slopescaledepthbias_shadowmap "5"
- mat_softwarelighting "0"
- mat_softwareskin "0"
- mat_software_aa_blur_one_pixel_lines "0" // (1.0 - lots)
- mat_software_aa_debug "0" // (2 - show anti-a
- mat_software_aa_edge_threshold "1" // Software AA - adjusts the sensitivity of the software AA shaders edge detection (default 1.0 - a lower value will soften more
- mat_software_aa_quality "0" // (1 - 9-tap filter)
- mat_software_aa_strength "0" // Software AA - perform a software anti-aliasing post-process (an alternative/supplement to MSAA). This value sets the strength o
- mat_software_aa_strength_vgui "1" // but forced to this value when called by the post vgui AA pass.
- mat_software_aa_tap_offset "1" // Software AA - adjusts the displacement of the taps used by the software AA shader (default 1.0 - a lower value will make the im
- mat_specular "1" // Enable/Disable specularity for perf testing. Will cause a material reload upon change.
- mat_spewvertexandpixelshaders // Print all vertex and pixel shaders currently loaded to the console
- mat_stub "0"
- mat_supportflashlight "0" // 1 - flashlight is supported
- mat_suppress // Supress a material from drawing
- mat_surfaceid "0"
- mat_surfacemat "0"
- mat_texture_limit "-1" // the material system will limit the amount of texture memory it uses in a frame. Useful for identifying
- mat_texture_list "0" // show a list of used textures per frame
- mat_texture_list_all "0" // then the texture list panel will show all currently-loaded textures.
- mat_texture_list_content_path "0" // itll assume your content directory is next to the currently runn
- mat_texture_list_txlod // -1 to dec resolution
- mat_texture_list_txlod_sync // save - saves all changes to material content files
- mat_texture_list_view "1" // then the texture list panel will render thumbnails of currently-loaded textures.
- mat_tonemapping_occlusion_use_stencil "0"
- mat_tonemap_algorithm "1" // 0 = Original Algorithm 1 = New Algorithm
- mat_tonemap_min_avglum "3"
- mat_tonemap_percent_bright_pixels "2"
- mat_tonemap_percent_target "60"
- mat_trilinear "0"
- mat_use_compressed_hdr_textures "1"
- mat_viewportscale "1" // Scale down the main viewport (to reduce GPU impact on CPU profiling)
- mat_vsync "0" // Force sync to vertical retrace
- mat_wateroverlaysize "128"
- mat_wireframe "0"
- mat_yuv "0"
- maxplayers // Change the maximum number of players allowed on this server.
- memory // Print memory stats.
- mem_compact
- mem_dump // Dump memory stats to text file.
- mem_dumpstats "0" // Dump current and max heap usage info to console at end of frame ( set to 2 for continuous output )
- mem_dumpvballocs // Dump VB memory allocation stats.
- mem_eat
- mem_force_flush "0" // Force cache flush of unlocked resources on every alloc
- mem_max_heapsize "256" // Maximum amount of memory to dedicate to engine hunk and datacache (in mb)
- mem_max_heapsize_dedicated "64" // for dedicated server (in mb)
- mem_min_heapsize "48" // Minimum amount of memory to dedicate to engine hunk and datacache (in mb)
- mem_periodicdumps "0" // Write periodic memstats dumps every n seconds.
- mem_test
- mem_test_each_frame "0" // Run heap check at end of every frame
- mem_test_every_n_seconds "0" // Run heap check at a specified interval
- mem_vcollide // Dumps the memory used by vcollides
- metropolice_charge "1"
- metropolice_chase_use_follow "0"
- metropolice_move_and_melee "1"
- minisave // Saves game (for current level only!)
- mission_list // List all available tactical missions
- mission_show // Show the given mission
- mm_add_item // Add a stats item
- mm_add_player // Add a player
- mm_max_spectators "4" // Max players allowed on the spectator team
- mm_message // Send a message to all remote clients
- mm_minplayers "2" // Number of players required to start an unranked game
- mm_select_session // Select a session
- mm_session_info // Dump session information
- mm_stats
- mod_forcedata "1" // Forces all model file data into cache on model load.
- mod_forcetouchdata "1" // Forces all model file data into cache on model load.
- mod_load_anims_async "0"
- mod_load_fakestall "0" // Forces all ANI file loading to stall for specified ms
- mod_load_mesh_async "0"
- mod_load_showstall "0" // 2 - show stalls
- mod_load_vcollide_async "0"
- mod_lock_mdls_on_load "0"
- mod_test_mesh_not_available "0"
- mod_test_not_available "0"
- mod_test_verts_not_available "0"
- mod_touchalldata "1" // Touch model data during level startup
- mod_trace_load "0"
- monk_headshot_freq "2"
- mortar_visualize "0"
- motdfile "0" // The MOTD file to load.
- motdfile_text "0" // The text-only MOTD file to use for clients that have disabled HTML MOTDs.
- movie_fixwave // etc.
- mp_allowNPCs "1"
- mp_allowspectators "1" // toggles whether the server allows spectator mode or not
- mp_autocrosshair "1"
- mp_bonusroundtime "15" // Time after round win until round restarts
- mp_chattime "10" // amount of time players can chat after the game is over
- mp_clan_readyrestart "0" // game will restart once someone from each team gives the ready signal
- mp_clan_ready_signal "0" // Text that team leader from each team must speak for the match to begin
- mp_decals "200"
- mp_defaultteam "0"
- mp_disable_autokick // Prevents a userid from being auto-kicked
- mp_disable_respawn_times "0"
- mp_fadetoblack "0" // fade a players screen to black when he dies
- mp_falldamage "0"
- mp_flashlight "0"
- mp_footsteps "1"
- mp_forceautoteam "0" // Automatically assign players to teams when joining.
- mp_forcecamera "1" // Restricts spectator modes for dead players
- mp_forcerespawn "1"
- mp_fraglimit "0" // The number of kills at which the map ends
- mp_friendlyfire "0" // Allows team members to injure other members of their team
- mp_maxrounds "0" // max number of rounds to play before server changes maps
- mp_respawnwavetime "10" // Time between respawn waves.
- mp_restartgame "0" // game will restart in the specified number of seconds
- mp_stalemate_meleeonly "0" // Restrict everyone to melee weapons only while in Sudden Death.
- mp_teamlist "0"
- mp_teamoverride "1"
- mp_teamplay "0"
- mp_teams_unbalance_limit "1" // Teams are unbalanced when one team has this many more players than the other team. (0 disables check)
- mp_timelimit "0" // game time per map in minutes
- mp_tournament "0"
- mp_usehwmmodels "0" // 0 = based upon GPU)
- mp_usehwmvcds "0" // 0 = based upon GPU)
- mp_waitingforplayers_cancel "0" // Set to 1 to end the WaitingForPlayers period.
- mp_waitingforplayers_restart "0" // Set to 1 to start or restart the WaitingForPlayers period.
- mp_waitingforplayers_time "0" // WaitingForPlayers time length in seconds
- mp_weaponstay "0"
- mp_winlimit "0" // Max score one team can reach before server changes maps
- multvar // Multiply specified convar value.
- muzzleflash_light "1"
- m_customaccel "0" // 2 enable with separate yaw/pitch rescale). Formula: mousesensitivity = ( raw
- m_customaccel_exponent "1" // Mouse move is raised to this power before being scaled by scale factor.
- m_customaccel_max "0" // 0 for no limit
- m_customaccel_scale "0" // Custom mouse acceleration value.
- m_filter "0" // Mouse filtering (set this to 1 to average the mouse over 2 frames).
- m_forward "1" // Mouse forward factor.
- m_mouseaccel1 "0" // Windows mouse acceleration initial threshold (2x movement).
- m_mouseaccel2 "0" // Windows mouse acceleration secondary threshold (4x movement).
- m_mousespeed "1" // Windows mouse speed factor (range 1 to 20).
- m_pitch "0" // Mouse pitch factor.
- m_side "0" // Mouse side factor.
- m_yaw "0" // Mouse yaw factor.
- name "0" // Current user name
- nav_add_to_selected_set // Add current area to the selected set.
- nav_add_to_selected_set_by_id // Add specified area id to the selected set.
- nav_analyze // Re-analyze the current Navigation Mesh and save it to disk.
- nav_area_bgcolor "0" // RGBA color to draw as the background color for nav areas while editing.
- nav_area_max_size "50" // Max area size created in nav generation
- nav_avoid // Toggles the avoid this area when possible flag used by the AI system.
- nav_begin_area // drag the opposite corner to the desired location and
- nav_begin_deselecting // Start continuously removing from the selected set.
- nav_begin_drag_deselecting // Start dragging a selection area.
- nav_begin_drag_selecting // Start dragging a selection area.
- nav_begin_selecting // Start continuously adding to the selected set.
- nav_begin_shift_xy // Begin shifting the Selected Set.
- nav_build_ladder // Attempts to build a nav ladder on the climbable surface under the cursor.
- nav_check_file_consistency // Scans the maps directory and reports any missing/out-of-date navigation files.
- nav_check_floor // Updates the blocked/unblocked status for every nav area.
- nav_check_stairs // Update the nav mesh STAIRS attribute
- nav_chop_selected // Chops all selected areas into their component 1x1 areas
- nav_clear_attribute // Remove given nav attribute from all areas in the selected set.
- nav_clear_selected_set // Clear the selected set.
- nav_clear_walkable_marks // Erase any previously placed walkable positions.
- nav_compress_id // Re-orders area and ladder IDs so they are continuous.
- nav_connect // then invoke the connect command. Note that this creates a
- nav_coplanar_slope_limit "0"
- nav_coplanar_slope_limit_displacement "0"
- nav_corner_adjust_adjacent "18" // radius used to raise/lower corners in nearby areas when raising/lowering corners.
- nav_corner_lower // Lower the selected corner of the currently marked Area.
- nav_corner_place_on_ground // Places the selected corner of the currently marked Area on the ground.
- nav_corner_raise // Raise the selected corner of the currently marked Area.
- nav_corner_select // Select a corner of the currently marked Area. Use multiple times to access all four corners.
- nav_create_area_at_feet "0" // Anchor nav_begin_area Z to editing players feet
- nav_create_place_on_ground "0" // nav areas will be placed flush with the ground when created by hand.
- nav_crouch // Toggles the must crouch in this area flag used by the AI system.
- nav_debug_blocked "0"
- nav_delete // Deletes the currently highlighted Area.
- nav_delete_marked // Deletes the currently marked Area (if any).
- nav_disconnect // then invoke the disconnect command. This will remove all connec
- nav_displacement_test "10000" // Checks for nodes embedded in displacements (useful for in-development maps)
- nav_dont_hide // Toggles the area is not suitable for hiding spots flag used by the AI system.
- nav_drag_selection_volume_zmax_offset "32" // The offset of the nav drag volume top from center
- nav_drag_selection_volume_zmin_offset "32" // The offset of the nav drag volume bottom from center
- nav_draw_limit "500" // The maximum number of areas to draw in edit mode
- nav_edit "0" // Set to one to interactively edit the Navigation Mesh. Set to zero to leave edit mode.
- nav_end_area // Defines the second corner of a new Area or Ladder and creates it.
- nav_end_deselecting // Stop continuously removing from the selected set.
- nav_end_drag_deselecting // Stop dragging a selection area.
- nav_end_drag_selecting // Stop dragging a selection area.
- nav_end_selecting // Stop continuously adding to the selected set.
- nav_end_shift_xy // Finish shifting the Selected Set.
- nav_flood_select // use this command again.
- nav_generate // Generate a Navigation Mesh for the current map and save it to disk.
- nav_generate_fencetops "1" // Autogenerate nav areas on fence and obstacle tops
- nav_generate_fixup_jump_areas "1" // Convert obsolete jump areas into 2-way connections
- nav_generate_incremental // Generate a Navigation Mesh for the current map and save it to disk.
- nav_generate_incremental_range "2000"
- nav_generate_incremental_tolerance "0" // Z tolerance for adding new nav areas.
- nav_gen_cliffs_approx // post-processing approximation
- nav_jump // Toggles the traverse this area by jumping flag used by the AI system.
- nav_ladder_flip // Flips the selected ladders direction.
- nav_load // Loads the Navigation Mesh for the current map.
- nav_lower_drag_volume_max // Lower the top of the drag select volume.
- nav_lower_drag_volume_min // Lower the bottom of the drag select volume.
- nav_make_sniper_spots // Chops the marked area into disconnected sub-areas suitable for sniper spots.
- nav_mark // Marks the Area or Ladder under the cursor for manipulation by subsequent editing commands.
- nav_mark_attribute // Set nav attribute for all areas in the selected set.
- nav_mark_unnamed // Mark an Area with no Place name. Useful for finding stray areas missed when Place Painting.
- nav_mark_walkable // Mark the current location as a walkable position. These positions are used as seed locations when sampling the map to generate
- nav_max_view_distance "6000" // Maximum range for precomputed nav mesh visibility (0 = default 1500 units)
- nav_max_vis_delta_list_length "64"
- nav_merge // and invoke the merge comm
- nav_merge_mesh // Merges a saved selected set into the current mesh.
- nav_no_hostages // Toggles the hostages cannot use this area flag used by the AI system.
- nav_no_jump // Toggles the dont jump in this area flag used by the AI system.
- nav_place_floodfill // and flood-fills the Place to all adjacent Areas. Flood-filli
- nav_place_list // Lists all place names used in the map.
- nav_place_pick // Sets the current Place to the Place of the Area under the cursor.
- nav_place_replace // Replaces all instances of the first place with the second place.
- nav_place_set // Sets the Place of all selected areas to the current Place.
- nav_potentially_visible_dot_tolerance "0"
- nav_precise // Toggles the dont avoid obstacles flag used by the AI system.
- nav_quicksave "1" // Set to one to skip the time consuming phases of the analysis. Useful for data collection and testing.
- nav_raise_drag_volume_max // Raise the top of the drag select volume.
- nav_raise_drag_volume_min // Raise the bottom of the drag select volume.
- nav_recall_selected_set // Re-selects the stored selected set.
- nav_remove_from_selected_set // Remove current area from the selected set.
- nav_remove_jump_areas // replacing them with connections.
- nav_run // Toggles the traverse this area by running flag used by the AI system.
- nav_save // Saves the current Navigation Mesh to disk.
- nav_save_selected // Writes the selected set to disk for merging into another mesh via nav_merge_mesh.
- nav_selected_set_border_color "100" // Color used to draw the selected set borders while editing.
- nav_selected_set_color "255" // Color used to draw the selected set background while editing.
- nav_select_blocked_areas // Adds all blocked areas to the selected set
- nav_select_damaging_areas // Adds all damaging areas to the selected set
- nav_select_half_space // Selects any areas that intersect the given half-space.
- nav_select_invalid_areas // Adds all invalid areas to the Selected Set.
- nav_select_obstructed_areas // Adds all obstructed areas to the selected set
- nav_select_overlapping // Selects nav areas that are overlapping others.
- nav_select_radius // Adds all areas in a radius to the selection set
- nav_select_stairs // Adds all stairway areas to the selected set
- nav_set_place_mode // Sets the editor into or out of Place mode. Place mode allows labelling of Area with Place names.
- nav_shift // Shifts the selected areas by the specified amount
- nav_show_approach_points "0" // Show Approach Points in the Navigation Mesh.
- nav_show_area_info "0" // Duration in seconds to show nav area ID and attributes while editing
- nav_show_compass "0"
- nav_show_continguous "0" // Highlight non-contiguous connections
- nav_show_danger "0" // Show current danger levels.
- nav_show_light_intensity "0"
- nav_show_nodes "0"
- nav_show_node_grid "0"
- nav_show_node_id "0"
- nav_show_player_counts "0" // Show current player counts in each area.
- nav_show_potentially_visible "0" // Show areas that are potentially visible from the current nav area
- nav_simplify_selected // Chops all selected areas into their component 1x1 areas and re-merges them together into larger areas
- nav_slope_limit "0" // The ground unit normals Z component must be greater than this for nav areas to be generated.
- nav_slope_tolerance "0" // The ground unit normals Z component must be this close to the nav areas Z component to be generated.
- nav_snap_to_grid "0" // Snap to the nav generation grid when creating new nav areas
- nav_solid_props "0" // Make props solid to nav generation/editing
- nav_splice // connected area between them.
- nav_split // align the split line using your cursor and invoke the split command.
- nav_split_place_on_ground "0" // nav areas will be placed flush with the ground when split.
- nav_stand // Toggles the stand while hiding flag used by the AI system.
- nav_stop // Toggles the must stop when entering this area flag used by the AI system.
- nav_store_selected_set // Stores the current selected set for later retrieval.
- nav_strip // and Encounter Spots from the current Area.
- nav_subdivide // Subdivides all selected areas.
- nav_test_node "0"
- nav_test_node_crouch "0"
- nav_test_node_crouch_dir "4"
- nav_test_stairs // Test the selected set for being on stairs
- nav_toggle_deselecting // Start or stop continuously removing from the selected set.
- nav_toggle_in_selected_set // Remove current area from the selected set.
- nav_toggle_place_mode // Toggle the editor into and out of Place mode. Place mode allows labelling of Area with Place names.
- nav_toggle_place_painting // pointing at an Area will paint it with the current Place.
- nav_toggle_selected_set // Toggles all areas into/out of the selected set.
- nav_toggle_selecting // Start or stop continuously adding to the selected set.
- nav_transient // Toggles the area is transient and may become blocked flag used by the AI system.
- nav_unmark // Clears the marked Area or Ladder.
- nav_update_blocked // Updates the blocked/unblocked status for every nav area.
- nav_update_lighting // Recomputes lighting values
- nav_update_visibility_on_edit "0" // If nonzero editing the mesh will incrementally recompue visibility
- nav_use_place // the current Place is set.
- nav_walk // Toggles the traverse this area by walking flag used by the AI system.
- nav_warp_to_mark // Warps the player to the marked area.
- nav_world_center // Centers the nav mesh in the world
- nb_allow_avoiding "1"
- nb_allow_climbing "1"
- nb_allow_gap_jumping "1"
- nb_blind "0" // Disable vision
- nb_command // Sends a command string to all bots
- nb_debug // ERRORS.
- nb_debug_climbing "0"
- nb_debug_filter // Add items to the NextBot debug filter. Items can be entindexes or part of the indentifier of one or more bots.
- nb_debug_history "1" // each bot keeps a history of debug output in memory
- nb_debug_known_entities "0" // Show the known entities for the bot that is the current spectator target
- nb_delete_all // Delete all non-player NextBot entities.
- nb_force_look_at // Force selected bot to look at the local players position
- nb_goal_look_ahead_range "50"
- nb_head_aim_resettle_angle "100" // the bot pauses to recenter its virtual mouse on its virtual mousepad
- nb_head_aim_resettle_time "0" // How long the bot pauses to recenter its virtual mouse on its virtual mousepad
- nb_head_aim_settle_duration "0"
- nb_head_aim_steady_max_rate "100"
- nb_ladder_align_range "50"
- nb_last_area_update_tolerance "4" // Distance a character needs to travel in order to invalidate cached area
- nb_move_to_cursor // Tell all NextBots to move to the cursor position
- nb_path_draw_inc "100"
- nb_path_draw_segment_count "100"
- nb_path_segment_influence_radius "100"
- nb_player_crouch "0" // Force bots to crouch
- nb_player_move "1" // Prevents bots from moving
- nb_player_move_direct "0"
- nb_player_stop "0" // Stop all NextBotPlayers from updating
- nb_player_walk "0" // Force bots to walk
- nb_saccade_speed "1000"
- nb_saccade_time "0"
- nb_select // Select the bot you are aiming at for further debug operations.
- nb_shadow_dist "400"
- nb_speed_look_ahead_range "150"
- nb_stop "0" // Stop all NextBots
- nb_update_debug "0"
- nb_update_framelimit "15"
- nb_update_frequency "0"
- nb_update_maxslide "2"
- nb_warp_selected_here // Teleport the selected bot to your cursor position
- net_blockmsg "0" // Discards incoming message: <0|1|name>
- net_channels // Shows net channel info
- net_chokeloop "0" // Apply bandwidth choke to loopback packets
- net_compresspackets "1" // Use lz compression on game packets.
- net_compresspackets_minsize "128" // Dont bother compressing packets below this size.
- net_compressvoice "0" // Attempt to compress out of band voice payloads (360 only).
- net_drawslider "0" // Draw completion slider during signon
- net_droppackets "0" // Drops next n packets on client
- net_fakejitter "0" // Jitter fakelag packet time
- net_fakelag "0" // Lag all incoming network data (including loopback) by this many milliseconds.
- net_fakeloss "0" // Simulate packet loss as a percentage (negative means drop 1/n packets)
- net_graph "0" // = 3 draws payload legend.
- net_graphheight "64" // Height of netgraph panel
- net_graphmsecs "400" // The latency graph represents this many milliseconds.
- net_graphpos "1"
- net_graphproportionalfont "1" // Determines whether netgraph font is proportional or not
- net_graphshowinterp "1" // Draw the interpolation graph.
- net_graphshowlatency "1" // Draw the ping/packet loss graph.
- net_graphsolid "1"
- net_graphtext "1" // Draw text fields
- net_maxcleartime "4" // Max # of seconds we can wait for next packets to be sent based on rate setting (0 == no limit).
- net_maxfilesize "16" // Maximum allowed file size for uploading in MB
- net_maxfragments "1260" // Max fragment bytes per packet
- net_maxroutable "1260" // Requested max packet size before packets are split.
- net_queued_packet_thread "1" // Use a high priority thread to send queued packets out instead of sending them each frame.
- net_queue_trace "0"
- net_scale "5"
- net_showdrop "0" // Show dropped packets in console
- net_showevents "0" // 2=all).
- net_showfragments "0" // Show netchannel fragments
- net_showmsg "0" // Show incoming message: <0|1|name>
- net_showpeaks "0" // Show messages for large packets only: <size>
- net_showsplits "0" // Show info about packet splits
- net_showtcp "0" // Dump TCP stream summary to console
- net_showudp "0" // Dump UDP packets summary to console
- net_splitpacket_maxrate "15000" // Max bytes per second when queueing splitpacket chunks
- net_splitrate "1" // Number of fragments for a splitpacket that can be sent per frame
- net_start // Inits multiplayer network sockets
- net_status // Shows current network status
- net_usesocketsforloopback "0" // Use network sockets layer even for listen server local players packets (multiplayer only).
- next "0" // Set to 1 to advance to next frame ( when singlestep == 1 )
- nextdemo // Play next demo in sequence.
- nextlevel "0" // will change to this map during the next changelevel
- noclip // Toggle. Player becomes non-solid and flies.
- notarget // Toggle. Player becomes hidden to NPCs.
- npc_ally_deathmessage "1"
- npc_alyx_crouch "1"
- npc_alyx_force_stop_moving "1"
- npc_alyx_readiness "1"
- npc_alyx_readiness_transitions "1"
- npc_ammo_deplete // Subtracts half of the targets ammo
- npc_barnacle_swallow "0" // Use prototype swallow code.
- npc_bipass // s
- npc_citizen_auto_player_squad "1"
- npc_citizen_auto_player_squad_allow_use "0"
- npc_citizen_dont_precache_all "0"
- npc_citizen_explosive_resist "0"
- npc_citizen_heal_chuck_medkit "1" // Set to 1 to use new experimental healthkit-throwing medic.
- npc_citizen_insignia "0"
- npc_citizen_medic_emit_sound "1"
- npc_citizen_medic_throw_speed "650"
- npc_citizen_medic_throw_style "1" // Set to 0 for a lobbier trajectory
- npc_citizen_squad_marker "0"
- npc_combat // Displays text debugging information about the squad and enemy of the selected NPC (See Overlay Text) Arguments: {npc_name}
- npc_conditions // Displays all the current AI conditions that an NPC has in the overlay text. Arguments: {npc_name} / {npc class_name} / no a
- npc_create // Creates an NPC of the given type where the player is looking (if the given NPC can actually stand at that location). Note that
- npc_create_aimed // Creates an NPC aimed away from the player of the given type where the player is looking (if the given NPC can actually stand at
- npc_create_equipment "0"
- npc_destroy // Removes the given NPC(s) from the universe Arguments: {npc_name} / {npc_class_name} / no argument picks what player is looki
- npc_destroy_unselected // Removes all NPCs from the universe that arent currently selected
- npc_enemies // Shows memory of NPC. Draws an X on top of each memory. Eluded entities drawn in blue (dont know where it went) Unreachable
- npc_focus // Displays red line to NPCs enemy (if has one) and blue line to NPCs target entity (if has one) Arguments: {npc_name} / {np
- npc_freeze // uses the NPC under the crosshair. Arguments
- npc_freeze_unselected // Freeze all NPCs not selected
- npc_go // Selected NPC(s) will go to the location that the player is looking (shown with a purple box) Arguments: -none-
- npc_go_do_run "1" // Set whether should run on NPC go
- npc_go_random // Sends all selected NPC(s) to a random node. Arguments: -none-
- npc_heal // Heals the target back to full health
- npc_height_adjust "1" // Enable test mode for ik height adjustment
- npc_kill // Kills the given NPC(s) Arguments: {npc_name} / {npc_class_name} / no argument picks what player is looking at
- npc_nearest // Draws a while box around the NPC(s) nearest node Arguments: {entity_name} / {class_name} / no argument picks what player i
- npc_relationships // Displays the relationships between this NPC and all others. Arguments: {entity_name} / {class_name} / no argument picks wha
- npc_reset // Reloads schedules for all NPCs from their script files Arguments: -none-
- npc_route // Displays the current route of the given NPC as a line on the screen. Waypoints along the route are drawn as small cyan rectang
- npc_select // Select or deselects the given NPC(s) for later manipulation. Selected NPCs are shown surrounded by a red translucent box Arg
- npc_sentences "0"
- npc_speakall // Force the npc to try and speak all their responses
- npc_squads // Obsolete. Replaced by npc_combat
- npc_steering // Displays the steering obstructions of the NPC (used to perform local avoidance) Arguments: {entity_name} / {class_name} / n
- npc_steering_all // Displays the steering obstructions of all NPCs (used to perform local avoidance)
- npc_strider_height_adj "0"
- npc_strider_shake_ropes_magnitude "150"
- npc_strider_shake_ropes_radius "1200"
- npc_tasks // Displays detailed text debugging information about the all the tasks of the selected NPC current schedule (See Overlay Text) A
- npc_task_text // Outputs text debugging information to the console about the all the tasks + break conditions of the selected NPC current schedu
- npc_teleport // Selected NPC will teleport to the location that the player is looking (shown with a purple box) Arguments: -none-
- npc_thinknow // Trigger NPC to think
- npc_viewcone // Displays the viewcone of the NPC (where they are currently looking and what the extents of there vision is) Arguments: {ent
- npc_vphysics "0"
- old_radiusdamage "0"
- option_duck_method "1"
- option_duck_method_default "1"
- opt_EnumerateLeavesFastAlgorithm "1" // Use the new SIMD version of CEngineBSPTree::EnumerateLeavesInBox.
- overview_alpha "1" // Overview map translucency.
- overview_health "1" // Show players health in map overview.
- overview_locked "1" // doesnt follow view angle.
- overview_mode // large: <0|1|2>
- overview_names "1" // Show players names in map overview.
- overview_tracks "1" // Show players tracks in map overview.
- overview_zoom // Sets overview map zoom: <zoom> [<time>] [rel]
- particle_simulateoverflow "0" // Used for stress-testing particle systems. Randomly denies creation of particles.
- particle_sim_alt_cores "2"
- particle_test_attach_attachment "0" // Attachment index for attachment mode
- particle_test_attach_mode "0" // follow_origin
- particle_test_file "0" // Name of the particle system to dynamically spawn
- particle_test_start // particle_test_attach_mode and particl
- particle_test_stop // Stops all particle systems on the selected entities. Arguments: {entity_name} / {class_name} / no argument picks what playe
- passenger_collision_response_threshold "250"
- passenger_debug_entry "0"
- passenger_debug_transition "0"
- passenger_impact_response_threshold "-350"
- passenger_use_leaning "1"
- password "0" // Current server access password
- path // Show the engine filesystem path.
- pause // Toggle the server pause state.
- perfui // Show/hide the level performance tools UI.
- perfvisualbenchmark
- perfvisualbenchmark_abort
- phonemedelay "0" // Phoneme delay to account for sound system latency.
- phonemefilter "0" // Time duration of box filter to pass over phonemes.
- phonemesnap "2" // regardless of duration.
- physcannon_ball_cone "0"
- physcannon_chargetime "2"
- physcannon_cone "0"
- physcannon_dmg_glass "15"
- physcannon_maxforce "1500"
- physcannon_maxmass "250"
- physcannon_mega_enabled "0"
- physcannon_mega_pullforce "8000"
- physcannon_mega_tracelength "850"
- physcannon_minforce "700"
- physcannon_pullforce "4000"
- physcannon_punt_cone "0"
- physcannon_tracelength "250"
- physicsshadowupdate_render "0"
- physics_budget // Times the cost of each active object
- physics_constraints // Highlights constraint system graph for an entity
- physics_debug_entity // Dumps debug info for an entity
- physics_highlight_active // Turns on the absbox for all active physics objects
- physics_report_active // Lists all active physics objects
- physics_select // Dumps debug info for an entity
- phys_impactforcescale "1"
- phys_penetration_error_time "10" // Controls the duration of vphysics penetration error boxes.
- phys_pushscale "1"
- phys_speeds "0"
- phys_stressbodyweights "5"
- phys_swap // Automatically swaps the current weapon for the physcannon and back again.
- phys_timescale "1" // Scale time for physics
- phys_upimpactforcescale "0"
- picker // pivot and debugging text is displayed for whatever entity the play
- ping // Display ping to server.
- pipeline_static_props "1"
- pistol_use_new_accuracy "1"
- pixelvis_debug // Dump debug info
- play // Play a sound.
- playdemo // Play a recorded demo file (.dem ).
- player_debug_print_damage "0" // print amount and type of all damage received by player to console.
- player_limit_jump_speed "1"
- player_old_armor "0"
- player_showpredictedposition "0"
- player_showpredictedposition_timestep "1"
- player_squad_autosummon_debug "0"
- player_squad_autosummon_move_tolerance "20"
- player_squad_autosummon_player_tolerance "10"
- player_squad_autosummon_time "5"
- player_squad_autosummon_time_after_combat "8"
- player_squad_double_tap_time "0"
- player_squad_transient_commands "1"
- player_throwforce "1000"
- playflush // reloading from disk in case of changes.
- playgamesound // Play a sound from the game sounds txt file
- playsoundscape // Forces a soundscape to play
- playvideo // Plays a video: <filename> [width height]
- playvideo_exitcommand // Plays a video and fires and exit command when it is stopped or finishes: <filename> <exit command>
- playvol // Play a sound at a specified volume.
- plugin_load // plugin_load <filename> : loads a plugin
- plugin_pause // plugin_pause <index> : pauses a loaded plugin
- plugin_pause_all // pauses all loaded plugins
- plugin_print // Prints details about loaded plugins
- plugin_unload // plugin_unload <index> : unloads a plugin
- plugin_unpause // plugin_unpause <index> : unpauses a disabled plugin
- plugin_unpause_all // unpauses all disabled plugins
- portal_demohack "0" // Do the demo_legacy_rollback setting to help during demo playback of going through portals.
- print_colorcorrection // Display the color correction layer information.
- progress_enable
- props_break_max_pieces "-1" // Maximum prop breakable piece count (-1 = model default)
- props_break_max_pieces_perframe "-1" // Maximum prop breakable piece count per frame (-1 = model default)
- prop_active_gib_limit "999999"
- prop_active_gib_max_fade_time "999999"
- prop_crosshair // Shows name for prop looking at
- prop_debug // props will show colorcoded bounding boxes. Red means ignore all damage. White means respond phys
- prop_dynamic_create // Creates a dynamic prop with a specific .mdl aimed away from where the player is looking. Arguments: {.mdl name}
- prop_physics_create // Creates a physics prop with a specific .mdl aimed away from where the player is looking. Arguments: {.mdl name}
- pwatchent "-1" // Entity to watch for prediction system changes.
- pwatchvar "0" // Entity variable to watch in prediction system for changes.
- quit // Exit the engine.
- radar_range "3000"
- ragdoll_sleepaftertime "5" // the ragdoll will go to sleep.
- rate "30000" // Max bytes/sec the host can receive data
- rcon // Issue an rcon command.
- rcon_address "0" // Address of remote server if sending unconnected rcon commands (format x.x.x.x:p)
- rcon_password "0" // remote console password.
- recompute_speed // Recomputes clock speed (for debugging purposes).
- record // Record a demo.
- refresh_options_dialog // Refresh the options dialog.
- reload // Reload the most recent saved game (add setpos to jump to current view position on reload).
- reload_materials "0"
- removeid // Remove a user ID from the ban list.
- removeip // Remove an IP address from the ban list.
- report_entities // Lists all entities
- report_simthinklist // Lists all simulating/thinking entities
- report_soundpatch // reports sound patch count
- report_soundpatch // reports sound patch count
- report_touchlinks // Lists all touchlinks
- respawn_entities // Respawn all the entities in the map.
- restart // Restart the game on the same level (add setpos to jump to current view position on restart).
- retry // Retry connection to last server.
- room_type "0"
- rope_averagelight "1" // Makes ropes use average of cubemap lighting instead of max intensity.
- rope_collide "1" // Collide rope with the world
- rope_rendersolid "1"
- rope_shake "0"
- rope_smooth "1" // Do an antialiasing effect on ropes
- rope_smooth_enlarge "1" // How much to enlarge ropes in screen space for antialiasing effect
- rope_smooth_maxalpha "0" // Alpha for rope antialiasing effect
- rope_smooth_maxalphawidth "1"
- rope_smooth_minalpha "0" // Alpha for rope antialiasing effect
- rope_smooth_minwidth "0" // this is the min screenspace width it lets a rope shrink to
- rope_solid_maxalpha "1"
- rope_solid_maxwidth "1"
- rope_solid_minalpha "0"
- rope_solid_minwidth "0"
- rope_subdiv "2" // Rope subdivision amount
- rope_wind_dist "1000" // Dont use CPU applying small wind gusts to ropes when theyre past this distance.
- rpg_missle_use_custom_detonators "1"
- rr_debugresponses "0" // it will only show response success/failure for np
- rr_debugrule "0" // that rules score will be shown whenever a concept is passed into the response rules system.
- rr_debug_qa "0" // Set to 1 to see debug related to the Question & Answer system used to create conversations between allied NPCs.
- rr_dumpresponses "0" // Dump all response_rules.txt and rules (requires restart)
- rr_reloadresponsesystems // Reload all response system scripts.
- r_3dnow // Enable/disable 3DNow code
- r_3dsky "1" // Enable the rendering of 3d sky boxes
- r_AirboatPitchCurveLinear "60"
- r_AirboatPitchCurveZero "25"
- r_AirboatRollCurveLinear "120"
- r_AirboatRollCurveZero "90"
- r_AirboatViewBlendTo "1"
- r_AirboatViewBlendToScale "0"
- r_AirboatViewBlendToTime "1"
- r_AirboatViewDampenDamp "1"
- r_AirboatViewDampenFreq "7"
- r_AirboatViewZHeight "0"
- r_ambientboost "1" // Set to boost ambient term if it is totally swamped by local lights
- r_ambientfactor "5" // Boost ambient cube by no more than this factor
- r_ambientfraction "0" // Fraction of direct lighting that ambient cube must be below to trigger boosting
- r_ambientlightingonly "0" // Set this to 1 to light models with only ambient lighting (and no static lighting).
- r_ambientmin "0" // Threshold above which ambient cube will not boost (i.e. its already sufficiently bright
- r_aspectratio "0"
- r_avglight "1"
- r_avglightmap "0"
- r_bloomtintb "0"
- r_bloomtintexponent "2"
- r_bloomtintg "0"
- r_bloomtintr "0"
- r_cheapwaterend
- r_cheapwaterstart
- r_cleardecals // Usage r_cleardecals <permanent>.
- r_ClipAreaPortals "1"
- r_colorstaticprops "0"
- r_debugcheapwater "0"
- r_debugrandomstaticlighting "0" // Set to 1 to randomize static lighting for debugging. Must restart for change to take affect.
- r_decals "2048"
- r_decalstaticprops "1" // Decal static props test
- r_decal_cover_count "4"
- r_decal_cullsize "5"
- r_decal_overlap_area "0"
- r_decal_overlap_count "3"
- r_depthoverlay "0" // Replaces opaque objects with their grayscaled depth values. r_showz_power scales the output.
- r_DispBuildable "0"
- r_DispDrawAxes "0"
- r_DispWalkable "0"
- r_dopixelvisibility "1"
- r_drawbatchdecals "1" // Render decals batched.
- r_DrawBeams "1" // 2=Wireframe
- r_drawbrushmodels "1" // 2=Wireframe
- r_drawclipbrushes "0" // purple=NPC)
- r_drawdecals "1" // Render decals.
- r_drawdetailprops "1" // 2=Wireframe
- r_DrawDisp "1" // Toggles rendering of displacment maps
- r_drawentities "1"
- r_drawflecks "1"
- r_drawfuncdetail "1" // Render func_detail
- r_drawleaf "-1" // Draw the specified leaf.
- r_drawlightcache "0" // 0: off 1: draw light cache entries 2: draw rays
- r_drawlightinfo "0"
- r_drawlights "0"
- r_drawmodeldecals "1"
- r_DrawModelLightOrigin "0"
- r_drawmodelstatsoverlay "0"
- r_drawmodelstatsoverlaydistance "500"
- r_drawmodelstatsoverlaymax "1" // time in milliseconds beyond which a model overlay is fully red in r_drawmodelstatsoverlay 2
- r_drawmodelstatsoverlaymin "0" // time in milliseconds that a model must take to render before showing an overlay in r_drawmodelstatsoverlay 2
- r_drawopaquerenderables "1"
- r_drawopaquestaticpropslast "0" // Whether opaque static props are rendered after non-npcs
- r_drawopaqueworld "1"
- r_drawothermodels "1" // 2=Wireframe
- r_drawparticles "1" // Enable/disable particle rendering
- r_drawpixelvisibility "0" // Show the occlusion proxies
- r_DrawPortals "0"
- r_DrawRain "1" // Enable/disable rain rendering.
- r_drawrenderboxes "0"
- r_drawropes "1"
- r_drawskybox "1"
- r_DrawSpecificStaticProp "-1"
- r_drawsprites "1"
- r_drawstaticprops "1" // 2=Wireframe
- r_drawtranslucentrenderables "1"
- r_drawtranslucentworld "1"
- r_drawvgui "1" // Enable the rendering of vgui panels
- r_drawviewmodel "1"
- r_drawworld "1" // Render the world.
- r_dscale_basefov "90"
- r_dscale_fardist "2000"
- r_dscale_farscale "4"
- r_dscale_neardist "100"
- r_dscale_nearscale "1"
- r_dynamic "1"
- r_dynamiclighting "1"
- r_emulategl "0"
- r_entityclips "1"
- r_eyeglintlodpixels "20" // The number of pixels wide an eyeball has to be before rendering an eyeglint. Is a floating point value.
- r_eyegloss "1"
- r_eyemove "1"
- r_eyes "1"
- r_eyeshift_x "0"
- r_eyeshift_y "0"
- r_eyeshift_z "0"
- r_eyesize "0"
- r_eyewaterepsilon "10"
- r_farz "-1" // Override the far clipping plane. -1 means to use the value in env_fog_controller.
- r_fastzreject "0" // Activate/deactivates a fast z-setting algorithm to take advantage of hardware with fast z reject. Use -1 to default to hardware
- r_fastzrejectdisp "0" // Activates/deactivates fast z rejection on displacements (360 only). Only active when r_fastzreject is on.
- r_flashlightambient "0"
- r_flashlightclip "0"
- r_flashlightconstant "0"
- r_flashlightculldepth "1"
- r_flashlightdepthres "1024"
- r_flashlightdepthtexture "1"
- r_flashlightdrawclip "0"
- r_flashlightdrawdepth "0"
- r_flashlightdrawfrustum "0"
- r_flashlightdrawfrustumbbox "0"
- r_flashlightdrawsweptbbox "0"
- r_flashlightfar "750"
- r_flashlightfov "45"
- r_flashlightladderdist "40"
- r_flashlightlinear "100"
- r_flashlightlockposition "0"
- r_flashlightmodels "1"
- r_flashlightnear "4"
- r_flashlightnodraw "0"
- r_flashlightoffsetx "10"
- r_flashlightoffsety "-20"
- r_flashlightoffsetz "24"
- r_flashlightquadratic "0"
- r_flashlightrender "1"
- r_flashlightrendermodels "1"
- r_flashlightrenderworld "1"
- r_flashlightscissor "1"
- r_flashlightshadowatten "0"
- r_flashlightupdatedepth "1"
- r_flashlightvisualizetrace "0"
- r_flashlight_version2 "0"
- r_flex "1"
- r_flushlod // Flush and reload LODs.
- r_forcecheapwater "0" // will show old renders if enabled after water has been seen
- r_ForceRestore "0"
- r_ForceWaterLeaf "1" // Enable for optimization to water - considers view in leaf under water for purposes of culling
- r_frustumcullworld "1"
- r_glint_alwaysdraw "0"
- r_glint_procedural "0"
- r_hunkalloclightmaps "1"
- r_hwmorph "1"
- r_itemblinkmax "0"
- r_itemblinkrate "4"
- r_JeepFOV "82"
- r_JeepViewBlendTo "1"
- r_JeepViewBlendToScale "0"
- r_JeepViewBlendToTime "1"
- r_JeepViewDampenDamp "1"
- r_JeepViewDampenFreq "7"
- r_JeepViewZHeight "10"
- r_lightaverage "1" // Activates/deactivate light averaging
- r_lightcachecenter "1"
- r_lightcachemodel "-1"
- r_lightcache_numambientsamples "162" // number of random directions to fire rays when computing ambient lighting
- r_lightcache_zbuffercache "0"
- r_lightinterp "5" // 0 turns off interpolation
- r_lightmap "-1"
- r_lightstyle "-1"
- r_lightwarpidentity "0"
- r_lockpvs "0" // Lock the PVS so you can fly around and inspect what is being drawn.
- r_lod "-1"
- r_mapextents "16384" // Set the max dimension for the map. This determines the far clipping plane
- r_maxdlights "32"
- r_maxmodeldecal "50"
- r_maxnewsamples "6"
- r_maxsampledist "128"
- r_minnewsamples "3"
- r_modelwireframedecal "0"
- r_newflashlight "1"
- r_nohw "0"
- r_norefresh "0"
- r_nosw "0"
- r_novis "0" // Turn off the PVS.
- r_occludeemaxarea "0" // Prevents occlusion testing for entities that take up more than X% of the screen. 0 means use whatever the level said to use.
- r_occluderminarea "0" // Prevents this occluder from being used if it takes up less than X% of the screen. 0 means use whatever the level said to use.
- r_occludermincount "0" // no matter how big they are.
- r_occlusion "1" // Activate/deactivate the occlusion system.
- r_occlusionspew "0" // Activate/deactivates spew about what the occlusion system is doing.
- r_oldlightselection "0" // Set this to revert to HL2s method of selecting lights
- r_overlayfadeenable "0"
- r_overlayfademax "2000"
- r_overlayfademin "1750"
- r_overlaywireframe "0"
- r_particle_sim_spike_threshold_ms "5"
- r_partition_level "-1" // Displays a particular level of the spatial partition system. Use -1 to disable it.
- r_PhysPropStaticLighting "1"
- r_pixelfog "1"
- r_pixelvisibility_partial "1"
- r_pixelvisibility_spew "0"
- r_pix_recordframes "0"
- r_pix_start "0"
- r_portalscloseall "0"
- r_portalsopenall "0" // Open all portals
- r_PortalTestEnts "1" // Clip entities against portal frustums.
- r_portal_stencil_depth "2" // this changes how many views within views we see
- r_portal_use_complex_frustums "1" // turn this off if you get odd visual bugs.
- r_portal_use_stencils "1" // Render portal views using stencils (if available)
- r_printdecalinfo
- r_proplightingfromdisk "1" // 2=Show Errors
- r_proplightingpooling "-1" // 1 - static prop color meshes are allocated from a single shared vertex buffer (on hardware that supports stream offset
- r_propsmaxdist "1200" // Maximum visible distance
- r_queued_decals "0" // Offloads a bit of decal rendering setup work to the material system queue when enabled.
- r_queued_post_processing "0"
- r_queued_ropes "1"
- r_radiosity "4" // 0: no radiosity 1: radiosity with ambient cube (6 samples) 2: radiosity with 162 samples 3: 162 samples for static props, 6 sam
- r_rainalpha "0"
- r_rainalphapow "0"
- r_raindensity "0"
- r_RainHack "0"
- r_rainlength "0"
- r_RainProfile "0" // Enable/disable rain profiling.
- r_RainRadius "1500"
- r_RainSideVel "130" // How much sideways velocity rain gets.
- r_RainSimulate "1" // Enable/disable rain simulation.
- r_rainspeed "600"
- r_RainSplashPercentage "20"
- r_rainwidth "0"
- r_randomflex "0"
- r_renderoverlayfragment "1"
- r_rimlight "1"
- r_rootlod "0" // Root LOD
- r_ropetranslucent "1"
- r_screenfademaxsize "0"
- r_screenfademinsize "0"
- r_screenoverlay // Draw specified material as an overlay
- r_sequence_debug "0"
- r_shader_srgb "0" // -1 = use hardware caps. 0 = use hardware srgb. 1 = use shader srgb(software lookup)
- r_shadowangles // Set shadow angles
- r_shadowblobbycutoff // some shadow stuff
- r_shadowcolor // Set shadow color
- r_shadowdir // Set shadow direction
- r_shadowdist // Set shadow distance
- r_shadowids "0"
- r_shadowmaxrendered "32"
- r_shadowrendertotexture "1"
- r_shadows "1"
- r_shadows_gamecontrol "-1"
- r_shadowwireframe "0"
- r_showenvcubemap "0"
- r_ShowViewerArea "0"
- r_showz_power "1"
- r_skin "0"
- r_skybox "1" // Enable the rendering of sky boxes
- r_snapportal "-1"
- r_SnowColorBlue "200" // Snow.
- r_SnowColorGreen "175" // Snow.
- r_SnowColorRed "150" // Snow.
- r_SnowDebugBox "0" // Snow Debug Boxes.
- r_SnowEnable "1" // Snow Enable
- r_SnowEndAlpha "255" // Snow.
- r_SnowEndSize "0" // Snow.
- r_SnowFallSpeed "1" // Snow fall speed scale.
- r_SnowInsideRadius "256" // Snow.
- r_SnowOutsideRadius "1024" // Snow.
- r_SnowParticles "500" // Snow.
- r_SnowPosScale "1" // Snow.
- r_SnowRayEnable "1" // Snow.
- r_SnowRayLength "8192" // Snow.
- r_SnowRayRadius "256" // Snow.
- r_SnowSpeedScale "1" // Snow.
- r_SnowStartAlpha "25" // Snow.
- r_SnowStartSize "1" // Snow.
- r_SnowWindScale "0" // Snow.
- r_SnowZoomOffset "384" // Snow.
- r_SnowZoomRadius "512" // Snow.
- r_spray_lifetime "2" // Number of rounds player sprays are visible
- r_sse2 // Enable/disable SSE2 code
- r_sse_s "1" // sse ins for particle sphere create
- r_staticpropinfo "0"
- r_staticprop_lod "-1"
- r_swingflashlight "1"
- r_teeth "1"
- r_threaded_client_shadow_manager "0"
- r_threaded_particles "1"
- r_threaded_renderables "0"
- r_unloadlightmaps "0"
- r_updaterefracttexture "1"
- r_vehicleBrakeRate "1"
- r_VehicleViewClamp "1"
- r_VehicleViewDampen "1"
- r_visambient "0" // Draw leaf ambient lighting samples. Needs mat_leafvis 1 to work
- r_visocclusion "0" // Activate/deactivate wireframe rendering of what the occlusion system is doing.
- r_visualizelighttraces "0"
- r_visualizelighttracesshowfulltrace "0"
- r_visualizeproplightcaching "0"
- r_visualizetraces "0"
- r_WaterDrawReflection "1" // Enable water reflection
- r_WaterDrawRefraction "1" // Enable water refraction
- r_waterforceexpensive "1"
- r_waterforcereflectentities "1"
- r_worldlightmin "0"
- r_worldlights "4" // number of world lights to use per vertex
- r_worldlistcache "1"
- save // Saves current game.
- save_async "1"
- save_asyncdelay "0" // adds this many milliseconds of delay to the save operation.
- save_console "0" // Autosave on the PC behaves like it does on the consoles.
- save_disable "0"
- save_finish_async
- save_history_count "1" // Keep this many old copies in history of autosaves and quicksaves.
- save_huddelayframes "1" // Number of frames to defer for drawing the Saving message.
- save_in_memory "0" // Set to 1 to save to memory instead of disk (Xbox 360)
- save_noxsave "0"
- save_screenshot "1" // 2 = always
- save_spew "0"
- say // Display player message
- say_team // Display player message to team
- sb_mod_suggested_maxplayers "0"
- sb_quick_list_bit_field "-1"
- sb_showblacklists "0" // blacklist rules will be printed to the console as theyre applied.
- scene_async_prefetch_spew "0" // Display async .ani file loading info.
- scene_clamplookat "1" // Clamp head turns to a max of 20 degrees per think.
- scene_clientflex "1" // Do client side flex animation.
- scene_flatturn "1"
- scene_flush // Flush all .vcds from the cache and reload from disk.
- scene_forcecombined "0" // force use of combined .wav files even in english.
- scene_maxcaptionradius "1200" // Only show closed captions if recipient is within this many units of speaking actor (0==disabled).
- scene_print "0" // print timing and event info to console.
- scene_showfaceto "0" // show the directions of faceto events.
- scene_showlook "0" // show the directions of look events.
- scene_showmoveto "0" // show the end location.
- scene_showunlock "0" // Show when a vcd is playing but normal AI is running.
- screenshot // Take a screenshot.
- scr_centertime "2"
- sensitivity "2" // Mouse sensitivity.
- servercfgfile "0"
- server_game_time // Gives the game time in seconds (servers curtime)
- setang // Snap player eyes to specified pitch yaw <roll:optional> (must have sv_cheats).
- setang_exact // Snap player eyes and orientation to specified pitch yaw <roll:optional> (must have sv_cheats).
- setinfo // Adds a new user info value
- setmaster // add/remove/enable/disable master servers
- setmodel // Changess players model
- setpause // Set the pause state of the server.
- setpos // Move player to specified origin (must have sv_cheats).
- setpos_exact // Move player to an exact specified origin (must have sv_cheats).
- shake // Shake the screen.
- shake_show "0" // Displays a list of the active screen shakes.
- shake_stop // Stops all active screen shakes.
- showbudget_texture "0" // Enable the texture budget panel.
- showbudget_texture_global_dumpstats // Dump all items in +showbudget_texture_global in a text form
- showbudget_texture_global_sum "256"
- showconsole // Show the console.
- showhitlocation "0"
- showinfo // Shows a info panel: <type> <title> <message> [<command number>]
- showpanel // Shows a viewport panel <name>
- showparticlecounts "0" // Display number of particles drawn per frame
- showsniperdist "0"
- showsniperlines "0"
- showtriggers "0" // Shows trigger brushes
- showtriggers_toggle // Toggle show triggers
- simple_bot_add // Add a simple bot.
- singlestep "0" // Run engine in single step mode ( set next to 1 to advance a frame )
- skill "1" // Game skill level (1-3).
- skip_next_map // Skips the next map in the map rotation for the server.
- sk_airboat_drain_rate "10"
- sk_airboat_max_ammo "100"
- sk_airboat_recharge_rate "15"
- sk_allow_autoaim "1"
- sk_ally_regen_time "0" // Time taken for an ally to regenerate a point of health.
- sk_ammo_qty_scale1 "1"
- sk_ammo_qty_scale2 "1"
- sk_ammo_qty_scale3 "0"
- sk_antlionguard_dmg_charge "0"
- sk_antlionguard_dmg_shove "0"
- sk_antlionguard_health "0"
- sk_antlion_air_attack_dmg "0"
- sk_antlion_health "0"
- sk_antlion_jump_damage "0"
- sk_antlion_swipe_damage "0"
- sk_antlion_worker_burst_damage "50" // How much damage is inflicted by an antlion workers death explosion.
- sk_antlion_worker_burst_radius "160" // Effect radius of an antlion workers death explosion.
- sk_antlion_worker_health "0" // will use base antlion hitpoints.
- sk_antlion_worker_spit_grenade_dmg "20" // Total damage done by an individual antlion worker loogie.
- sk_antlion_worker_spit_grenade_poison_ratio "0" // Percentage of an antlion workers spit damage done as poison (which regenerates)
- sk_antlion_worker_spit_grenade_radius "40" // Radius of effect for an antlion worker spit grenade.
- sk_antlion_worker_spit_speed "0" // Speed at which an antlion spit grenade travels.
- sk_apc_health "750"
- sk_apc_missile_damage "15"
- sk_autoaim_mode "1"
- sk_autoaim_scale1 "1"
- sk_autoaim_scale2 "1"
- sk_auto_reload_time "3"
- sk_barnacle_health "0"
- sk_barney_health "0"
- sk_battery "0"
- sk_bullseye_health "0"
- sk_citizen_giveammo_player_delay "10"
- sk_citizen_health "0"
- sk_citizen_heal_ally "30"
- sk_citizen_heal_ally_delay "20"
- sk_citizen_heal_ally_min_pct "0"
- sk_citizen_heal_player "25"
- sk_citizen_heal_player_delay "25"
- sk_citizen_heal_player_min_forced "10"
- sk_citizen_heal_player_min_pct "0"
- sk_citizen_heal_toss_player_delay "26" // how long between throwing healthkits
- sk_citizen_player_stare_dist "72"
- sk_citizen_player_stare_time "1"
- sk_citizen_stare_heal_time "5"
- sk_combineball_guidefactor "0"
- sk_combineball_seek_angle "15"
- sk_combineball_seek_kill "0"
- sk_combine_ball_search_radius "512"
- sk_combine_guard_health "0"
- sk_combine_guard_kick "0"
- sk_combine_s_health "0"
- sk_combine_s_kick "0"
- sk_crowbar_lead_time "0"
- sk_crow_health "1"
- sk_crow_melee_dmg "0"
- sk_dmg_homer_grenade "0"
- sk_dmg_inflict_scale1 "1"
- sk_dmg_inflict_scale2 "1"
- sk_dmg_inflict_scale3 "0"
- sk_dmg_pathfollower_grenade "0"
- sk_dmg_sniper_penetrate_npc "0"
- sk_dmg_sniper_penetrate_plr "0"
- sk_dmg_take_scale1 "0"
- sk_dmg_take_scale2 "1"
- sk_dmg_take_scale3 "2"
- sk_dropship_container_health "750"
- sk_dynamic_resupply_modifier "1"
- sk_env_headcrabcanister_shake_amplitude "50"
- sk_env_headcrabcanister_shake_radius "1024"
- sk_env_headcrabcanister_shake_radius_vehicle "2500"
- sk_fraggrenade_radius "0"
- sk_gunship_burst_dist "768"
- sk_gunship_burst_min "800"
- sk_gunship_burst_size "15"
- sk_gunship_health_increments "0"
- sk_headcrab_fast_health "0"
- sk_headcrab_health "0"
- sk_headcrab_melee_dmg "0"
- sk_headcrab_poison_health "0"
- sk_headcrab_poison_npc_damage "0"
- sk_healthcharger "0"
- sk_healthkit "0"
- sk_healthvial "0"
- sk_helicopter_burstcount "12" // the longer the firing is
- sk_helicopter_drone_speed "450" // How fast does the zapper drone move?
- sk_helicopter_firingcone "20" // The angle in degrees of the cone in which the shots will be fired
- sk_helicopter_grenadedamage "25" // The amount of damage the helicopter grenade deals.
- sk_helicopter_grenadeforce "55000" // The physics force that the helicopter grenade exerts.
- sk_helicopter_grenaderadius "275" // The damage radius of the helicopter grenade.
- sk_helicopter_grenade_puntscale "1" // scale its velocity by this much.
- sk_helicopter_health "5600"
- sk_helicopter_num_bombs1 "3"
- sk_helicopter_num_bombs2 "5"
- sk_helicopter_num_bombs3 "5"
- sk_helicopter_roundsperburst "5" // How many shots to fire in a single burst
- sk_homer_grenade_radius "0"
- sk_hunter_buckshot_damage_scale "0"
- sk_hunter_bullet_damage_scale "0"
- sk_hunter_charge_damage_scale "2"
- sk_hunter_citizen_damage_scale "0"
- sk_hunter_dmg_charge "20"
- sk_hunter_dmg_flechette "4"
- sk_hunter_dmg_from_striderbuster "150"
- sk_hunter_dmg_one_slash "20"
- sk_hunter_flechette_explode_dmg "12"
- sk_hunter_flechette_explode_radius "128"
- sk_hunter_health "210"
- sk_hunter_vehicle_damage_scale "2"
- sk_ichthyosaur_health "0"
- sk_ichthyosaur_melee_dmg "0"
- sk_jeep_gauss_damage "15"
- sk_manhack_health "0"
- sk_manhack_melee_dmg "0"
- sk_manhack_v2 "1"
- sk_max_357 "0"
- sk_max_alyxgun "0"
- sk_max_ar2 "0"
- sk_max_ar2_altfire "0"
- sk_max_buckshot "0"
- sk_max_crossbow "0"
- sk_max_gauss_round "0"
- sk_max_grenade "0"
- sk_max_hopwire "3"
- sk_max_pistol "0"
- sk_max_rpg_round "0"
- sk_max_smg1 "0"
- sk_max_smg1_grenade "0"
- sk_max_sniper_round "0"
- sk_max_striderbuster "3"
- sk_metropolice_health "0"
- sk_metropolice_simple_health "26"
- sk_metropolice_stitch_along_hitcount "2"
- sk_metropolice_stitch_at_hitcount "1"
- sk_metropolice_stitch_behind_hitcount "3"
- sk_metropolice_stitch_distance "1000"
- sk_metropolice_stitch_reaction "1"
- sk_metropolice_stitch_tight_hitcount "2"
- sk_npc_arm "1"
- sk_npc_chest "1"
- sk_npc_dmg_357 "0"
- sk_npc_dmg_airboat "0"
- sk_npc_dmg_alyxgun "0"
- sk_npc_dmg_ar2 "0"
- sk_npc_dmg_buckshot "0"
- sk_npc_dmg_combineball "15"
- sk_npc_dmg_crossbow "0"
- sk_npc_dmg_crowbar "0"
- sk_npc_dmg_dropship "5" // Dropship container cannon damage.
- sk_npc_dmg_fraggrenade "0"
- sk_npc_dmg_grenade "0"
- sk_npc_dmg_gunship "0"
- sk_npc_dmg_gunship_to_plr "0"
- sk_npc_dmg_helicopter "6" // Damage helicopter shots deal to everything but the player
- sk_npc_dmg_helicopter_to_plr "3" // Damage helicopter shots deal to the player
- sk_npc_dmg_pistol "0"
- sk_npc_dmg_rpg_round "0"
- sk_npc_dmg_smg1 "0"
- sk_npc_dmg_smg1_grenade "0"
- sk_npc_dmg_sniper_round "0"
- sk_npc_dmg_stunstick "0"
- sk_npc_head "2"
- sk_npc_leg "1"
- sk_npc_stomach "1"
- sk_pathfollower_grenade_radius "0"
- sk_player_arm "1"
- sk_player_chest "1"
- sk_player_head "2"
- sk_player_leg "1"
- sk_player_stomach "1"
- sk_plr_dmg_357 "0"
- sk_plr_dmg_airboat "0"
- sk_plr_dmg_alyxgun "0"
- sk_plr_dmg_ar2 "0"
- sk_plr_dmg_buckshot "0"
- sk_plr_dmg_crossbow "0"
- sk_plr_dmg_crowbar "0"
- sk_plr_dmg_fraggrenade "0"
- sk_plr_dmg_grenade "0"
- sk_plr_dmg_pistol "0"
- sk_plr_dmg_rpg_round "0"
- sk_plr_dmg_smg1 "0"
- sk_plr_dmg_smg1_grenade "0"
- sk_plr_dmg_sniper_round "0"
- sk_plr_dmg_stunstick "0"
- sk_plr_grenade_drop_time "30"
- sk_plr_health_drop_time "30"
- sk_plr_num_shotgun_pellets "7"
- sk_rollermine_shock "0"
- sk_rollermine_stun_delay "1"
- sk_rollermine_vehicle_intercept "1"
- sk_scanner_dmg_dive "0"
- sk_scanner_health "0"
- sk_smg1_grenade_radius "0"
- sk_stalker_health "0"
- sk_stalker_melee_dmg "0"
- sk_striderbuster_magnet_multiplier "2"
- sk_strider_health "350"
- sk_strider_num_missiles1 "5"
- sk_strider_num_missiles2 "7"
- sk_strider_num_missiles3 "7"
- sk_suitcharger "0"
- sk_suitcharger_citadel "0"
- sk_suitcharger_citadel_maxarmor "0"
- sk_vortigaunt_armor_charge "30"
- sk_vortigaunt_armor_charge_per_token "5"
- sk_vortigaunt_dmg_claw "0"
- sk_vortigaunt_dmg_rake "0"
- sk_vortigaunt_dmg_zap "0"
- sk_vortigaunt_health "0"
- sk_vortigaunt_vital_antlion_worker_dmg "0" // Vital-ally vortigaunts scale damage taken from antlion workers by this amount.
- sk_vortigaunt_zap_range "100" // Range of vortigaunts ranged attack (feet)
- sk_weapon_ar2_alt_fire_duration "2"
- sk_weapon_ar2_alt_fire_mass "150"
- sk_weapon_ar2_alt_fire_radius "10"
- sk_zombie_dmg_both_slash "0"
- sk_zombie_dmg_one_slash "0"
- sk_zombie_health "0"
- sk_zombie_poison_dmg_spit "0"
- sk_zombie_poison_health "0"
- sk_zombie_soldier_health "0"
- slot0
- slot1
- slot10
- slot2
- slot3
- slot4
- slot5
- slot6
- slot7
- slot8
- slot9
- smoke_trail "1"
- smoothstairs "1" // Smooth player eye z coordinate when traversing stairs.
- snapto
- sndplaydelay
- snd_async_flush // Flush all unlocked async audio data
- snd_async_fullyasync "0" // All playback is fully async (sound doesnt play until data arrives).
- snd_async_minsize "262144"
- snd_async_showmem // Show async memory stats
- snd_async_spew_blocking "0" // Spew message to console any time async sound loading blocks on file i/o.
- snd_async_stream_spew "0" // 2=buffers
- snd_cull_duplicates "0" // aggressively cull duplicate sounds during mixing. The number specifies the number of duplicates allowed to be playe
- snd_defer_trace "1"
- snd_delay_sound_shift "0"
- snd_disable_mixer_duck "0"
- snd_duckerattacktime "0"
- snd_duckerreleasetime "2"
- snd_duckerthreshold "0"
- snd_ducktovolume "0"
- snd_dumpclientsounds // Dump sounds to VXConsole
- snd_foliage_db_loss "4"
- snd_gain "1"
- snd_gain_max "1"
- snd_gain_min "0"
- snd_legacy_surround "0"
- snd_lockpartial "1"
- snd_mixahead "0"
- snd_mix_async "0"
- snd_mix_minframetime "0"
- snd_musicvolume "1" // Music volume
- snd_noextraupdate "0"
- snd_obscured_gain_dB "-2"
- snd_pitchquality "1"
- snd_profile "0"
- snd_rebuildaudiocache // level caches) from reslists
- snd_refdb "60"
- snd_refdist "36"
- snd_restart // Restart sound system.
- snd_show "0" // Show sounds info
- snd_showclassname "0"
- snd_showmixer "0"
- snd_showstart "0"
- snd_ShowThreadFrameTime "0"
- snd_soundmixer "0"
- snd_spatialize_roundrobin "0" // spatialize only a fraction of sound channels each frame. 1/2^x of channels will be spatialized
- snd_surround_speakers "2"
- snd_visualize "0" // Show sounds location in world
- snd_vox_captiontrace "0" // Shows sentence name for sentences which are set not to show captions.
- snd_vox_globaltimeout "300"
- snd_vox_sectimetout "300"
- snd_vox_seqtimetout "300"
- snd_writemanifest // outputs the precache manifest for the current level
- sniperspeak "0"
- sniperviewdist "35"
- sniper_xbox_delay "1"
- soundfade // Fade client volume.
- soundinfo // Describe the current sound device.
- soundlist // List all known sounds.
- soundpatch_captionlength "2" // How long looping soundpatch captions should display for.
- soundscape_debug "0" // red lines show soundscapes that ar
- soundscape_dumpclient // Dumps the clients soundscape data.
- soundscape_fadetime "3" // Time to crossfade sound effects between soundscapes
- soundscape_flush // Flushes the server & client side soundscapes
- speak // Play a constructed sentence.
- spec_autodirector "1" // Auto-director chooses best view modes while spectating
- spec_freeze_distance_max "200" // Maximum random distance from the target to stop when framing them in observer freeze cam.
- spec_freeze_distance_min "96" // Minimum random distance from the target to stop when framing them in observer freeze cam.
- spec_freeze_time "4" // Time spend frozen in observer freeze cam.
- spec_freeze_traveltime "0" // Time taken to zoom in to frame a target in observer freeze cam.
- spec_mode // Set spectator mode
- spec_next // Spectate next player
- spec_player // Spectate player by name
- spec_pos // dump position and angles to the console
- spec_prev // Spectate previous player
- spec_scoreboard "0"
- spec_track "0" // Tracks an entity in spec mode
- spike // generates a fake spike
- startadmiregloves // Starts the admire gloves animation.
- startdemos // Play demos in demo sequence.
- startmovie // Start recording movie frames.
- startneurotoxins // Starts the nerve gas timer.
- startupmenu // and were not in developer
- star_memory // Dump memory stats
- stats // Prints server performance variables
- status // Display map and connection status.
- step_spline "0"
- stop // Finish recording demo.
- stopdemo // Stop playing back a demo.
- stopsound
- stopsoundscape // Stops all soundscape processing and fades current looping sounds
- striderbuster_allow_all_damage "0" // If set to 1 the bomb will detonate on any damage taken. Otherwise only the player may trigger it.
- striderbuster_autoaim_radius "64"
- striderbuster_debugseek "0"
- striderbuster_die_detach "1"
- striderbuster_dive_force "-200"
- striderbuster_falloff_power "4" // Order of the distance falloff. 1 = linear 2 = quadratic
- striderbuster_health "14"
- striderbuster_leg_stick_dist "80" // the max distance from the head at which it sticks anyway.
- striderbuster_magnetic_force_hunter "1750000" // Intensity of magnades attraction to a hunter.
- striderbuster_magnetic_force_strider "750000" // Intensity of magnades attraction to a strider.
- striderbuster_shot_velocity "2500" // Speed at which launch the bomb from the physcannon
- striderbuster_use_particle_flare "1"
- strider_always_use_procedural_height "0"
- strider_ar2_altfire_dmg "25"
- strider_distributed_fire "1"
- strider_eyepositions "0"
- strider_free_knowledge "0"
- strider_free_pass_after_escorts_dead "2"
- strider_free_pass_cover_dist "120"
- strider_free_pass_duration "2"
- strider_free_pass_move_tolerance "320"
- strider_free_pass_refill_rate "0"
- strider_free_pass_start_time "3"
- strider_free_pass_tolerance_after_escorts_dead "600"
- strider_idle_test "0"
- strider_immolate "0"
- strider_missile_suppress_dist "240"
- strider_missile_suppress_time "3"
- strider_pct_height_no_crouch_move "90"
- strider_peek_eye_dist "1"
- strider_peek_eye_dist_z "4"
- strider_peek_time "0"
- strider_peek_time_after_damage "4"
- strider_show_cannonlos "0"
- strider_show_focus "0"
- strider_show_weapon_los_condition "0"
- strider_show_weapon_los_z "0"
- strider_test_height "0"
- studio_queue_mode "1"
- stuffcmds // Parses and stuffs command line + commands to command buffer.
- suitvolume "0"
- surfaceprop // Reports the surface properties at the cursor
- sv_allowdownload "1" // Allow clients to download files
- sv_allowupload "1" // Allow clients to upload customizations files
- sv_allow_color_correction "1" // Allow or disallow clients to use color correction on this server.
- sv_allow_voice_from_file "1" // Allow or disallow clients from using voice_inputfromfile on this server.
- sv_allow_wait_command "1" // Allow or disallow the wait command on clients connected to this server.
- sv_alltalk "0" // no team restrictions
- sv_alternateticks "0" // server only simulates entities on even numbered ticks.
- sv_autojump "0"
- sv_autoladderdismount "1" // Automatically dismount from ladders when you reach the end (dont have to +USE).
- sv_autosave "1" // Set to 1 to autosave game on level transition. Does not affect autosave triggers.
- sv_benchmark_autovprofrecord "0" // it will record a vprof file over the duration of the benchmark with filename benchmark.
- sv_benchmark_force_start // Force start the benchmark. This is only for debugging. Its better to set sv_benchmark to 1 and restart the level.
- sv_benchmark_numticks "3300" // then it only runs the benchmark for this # of ticks.
- sv_bonus_challenge "0" // Set to values other than 0 to select a bonus map challenge type.
- sv_bonus_map_challenge_update // Updates a bonus map challenge score.
- sv_bonus_map_complete // Completes a bonus map.
- sv_bonus_map_unlock // Locks a bonus map.
- sv_cacheencodedents "1" // does an optimization to prevent extra SendTable_Encode calls.
- sv_cheats "0" // Allow cheats on server
- sv_clearhinthistory // Clear memory of server side hints displayed to the player.
- sv_client_cmdrate_difference "20" // cl_cmdrate is moved to within sv_client_cmdrate_difference units of cl_updaterate before it is clamped between sv_mincmdrate an
- sv_client_max_interp_ratio "5" // This can be used to limit the value of cl_interp_ratio for connected clients (only while they are connected). If sv_client_min_
- sv_client_min_interp_ratio "1" // This can be used to limit the value of cl_interp_ratio for connected clients (only while they are connected). -1
- sv_client_predict "-1" // This can be used to force the value of cl_predict for connected clients (only while they are connected). -1 = let clients se
- sv_clockcorrection_msecs "60" // The server tries to keep each players m_nTickBase withing this many msecs of the server absolute tickcount
- sv_consistency "1" // Whether the server enforces file consistency for critical files
- sv_contact "0" // Contact email for server sysop
- sv_debugmanualmode "0" // Make sure entities correctly report whether or not their network data has changed.
- sv_debugtempentities "0" // Show temp entity bandwidth usage.
- sv_debug_physicsshadowclones "0"
- sv_debug_player_use "0" // Green box=radius success
- sv_deltaprint "0" // Print accumulated CalcDelta profiling data (only if sv_deltatime is on)
- sv_deltatime "0" // Enable profiling of CalcDelta calls
- sv_disable_querycache "0" // debug - disable trace query cache
- sv_downloadurl "0" // Location from which clients can download missing files
- sv_dumpstringtables "0"
- sv_enableoldqueries "0" // Enable support for old style (HL1) server queries
- sv_filterban "1" // Set packet filtering by IP mode
- sv_forcepreload "0" // Force server side preloading.
- sv_fullsyncclones "1"
- sv_gravity "600" // World gravity.
- sv_infinite_aux_power "0"
- sv_ladderautomountdot "0" // this is the tolerance for looking now directly along the ladder axis.
- sv_ladder_useonly "0" // ladders can only be mounted by pressing +USE
- sv_lan "0" // no non-class C addresses )
- sv_logbans "0" // Log server bans in the server logs.
- sv_logblocks "0" // If true when log when a query is blocked (can cause very large log files)
- sv_logdownloadlist "1"
- sv_logecho "1" // Echo log information to the console.
- sv_logfile "1" // Log server information in the log file.
- sv_logflush "0" // Flush the log file to disk on each write (slow).
- sv_logsdir "0" // Folder in the game directory where server logs will be stored.
- sv_log_onefile "0" // Log server information to only one file.
- sv_massreport "0"
- sv_master_legacy_mode "0" // Use old (outside-of-Steam) code to communicate with master servers.
- sv_master_share_game_socket "1" // then it will create a socket on -steamport + 1 to comm
- sv_maxcmdrate "66" // this sets the maximum value for cl_cmdrate.
- sv_maxrate "0" // 0 == unlimited
- sv_maxreplay "0" // Maximum replay time in seconds
- sv_maxroutable "1260" // Server upper bound on net_maxroutable that a client can use.
- sv_maxupdaterate "66" // Maximum updates per second that the server will allow
- sv_max_queries_sec "3" // Maximum queries per second to respond to from a single IP address.
- sv_max_queries_sec_global "60" // Maximum queries per second to respond to from anywhere.
- sv_max_queries_window "30" // Window over which to average queries per second averages.
- sv_mincmdrate "10" // This sets the minimum value for cl_cmdrate. 0 == unlimited.
- sv_minrate "3500" // 0 == unlimited
- sv_minupdaterate "10" // Minimum updates per second that the server will allow
- sv_noclipaccelerate "5"
- sv_noclipduringpause "0" // etc.).
- sv_noclipspeed "5"
- sv_npc_talker_maxdist "1024" // NPCs over this distance from the player wont attempt to speak.
- sv_parallel_packentities "1"
- sv_parallel_sendsnapshot "1"
- sv_password "0" // Server password for entry into multiplayer games
- sv_pausable "0" // Is the server pausable.
- sv_playerperfhistorycount "20" // Number of samples to maintain in player perf history
- sv_player_funnel_into_portals "1" // Causes the player to auto correct toward the center of floor portals.
- sv_player_trace_through_portals "1" // Causes player movement traces to trace through portals.
- sv_portal_collision_sim_bounds_x "200" // Size of box used to grab collision geometry around placed portals. These should be at the default size or larger only!
- sv_portal_collision_sim_bounds_y "200" // Size of box used to grab collision geometry around placed portals. These should be at the default size or larger only!
- sv_portal_collision_sim_bounds_z "252" // Size of box used to grab collision geometry around placed portals. These should be at the default size or larger only!
- sv_portal_debug_touch "0"
- sv_portal_new_velocity_check "1"
- sv_portal_pathtrack_track_width_on "4"
- sv_portal_placement_debug "0"
- sv_portal_placement_never_bump "0"
- sv_portal_placement_never_fail "0"
- sv_portal_trace_vs_displacements "1" // Use traces against portal environment displacement geometry
- sv_portal_trace_vs_holywall "1" // Use traces against portal environment carved wall
- sv_portal_trace_vs_staticprops "1" // Use traces against portal environment static prop geometry
- sv_portal_trace_vs_world "1" // Use traces against portal environment world geometry
- sv_precacheinfo // Show precache info.
- sv_pure // Show user data.
- sv_pure_kick_clients "1" // it will issue a warning to the client.
- sv_pure_trace "0" // the server will print a message whenever a client is verifying a CRC for a file.
- sv_pvsskipanimation "1" // Skips SetupBones when npcs are outside the PVS
- sv_querycache_stats // Display status of the query cache (client only)
- sv_rcon_banpenalty "0" // Number of minutes to ban users who fail rcon authentication
- sv_rcon_log "1" // Enable/disable rcon logging.
- sv_rcon_maxfailures "10" // Max number of times a user can fail rcon authentication before being banned
- sv_rcon_minfailures "5" // Number of times a user can fail rcon authentication in sv_rcon_minfailuretime before being banned
- sv_rcon_minfailuretime "30" // Number of seconds to track failed rcon authentications
- sv_regeneration_wait_time "1"
- sv_region "-1" // The region of the world to report this server in.
- sv_robust_explosions "1"
- sv_showladders "0" // Show bbox and dismount points for all ladders (must be set before level load.)
- sv_showlagcompensation "0" // Show lag compensated hitboxes whenever a player is lag compensated.
- sv_show_crosshair_target "0"
- sv_skyname "0" // Current name of the skybox texture
- sv_soundemitter_trace "0" // Show all EmitSound calls including their symbolic name and the actual wave file they resolved to
- sv_specaccelerate "5"
- sv_specnoclip "1"
- sv_specspeed "3"
- sv_stats "1" // Collect CPU usage stats
- sv_stickysprint "0"
- sv_stickysprint_default "0"
- sv_strict_notarget "0" // notarget will cause entities to never think they are in the pvs
- sv_tags "0" // Server tags. Used to provide extra information to clients when theyre browsing for servers. Separate tags with a comma.
- sv_teststepsimulation "1"
- sv_test_scripted_sequences "0" // Tests for scripted sequences that are embedded in the world. Run through your map with this set to check for NPCs falling throu
- sv_thinktimecheck "0" // Check for thinktimes all on same timestamp.
- sv_timeout "65" // the client is dropped
- sv_turbophysics "0" // Turns on turbo physics
- sv_unlockedchapters "15" // Highest unlocked game chapter.
- sv_use_find_closest_passable_space "1" // Enables heavy-handed player teleporting stuck fix code.
- sv_use_shadow_clones "1"
- sv_use_transformed_collideables "1" // Disables traces against remote portal moving entities using transforms to bring them into local space.
- sv_vehicle_autoaim_scale "8"
- sv_visiblemaxplayers "-1" // Overrides the max players reported to prospective clients
- sv_voicecodec "0" // Specifies which voice codec DLL to use in a game. Set to the name of the DLL without the extension.
- sv_voiceenable "1"
- systemlinkport "27030" // System Link port
- sys_minidumpexpandedspew "1"
- sys_minidumpspewlines "500" // Lines of crash dump console spew to keep.
- template_debug "0"
- testhudanim // Test a hud element animation. Arguments: <anim name>
- testscript_debug "0" // Debug test scripts.
- Test_CreateEntity
- test_dispatcheffect // Test a clientside dispatch effect. Usage: test_dispatcheffect <effect name> <distance away> <flags> <magnitude> <scale> Defau
- Test_EHandle
- test_entity_blocker // Test command that drops an entity blocker out in front of the player.
- test_freezeframe // Test the freeze frame code.
- Test_InitRandomEntitySpawner
- test_massive_dmg "30"
- test_massive_dmg_clip "0"
- Test_ProxyToggle_EnableProxy
- Test_ProxyToggle_EnsureValue // Test_ProxyToggle_EnsureValue
- Test_ProxyToggle_SetValue
- Test_RandomizeInPVS
- Test_RandomPlayerPosition
- Test_RemoveAllRandomEntities
- Test_SpawnRandomEntities
- texture_budget_background_alpha "128" // how translucent the budget panel is
- texture_budget_panel_bottom_of_history_fraction "0" // number between 0 and 1
- texture_budget_panel_global "0" // Show global times in the texture budget panel.
- texture_budget_panel_height "284" // height in pixels of the budget panel
- texture_budget_panel_width "512" // width in pixels of the budget panel
- texture_budget_panel_x "0" // number of pixels from the left side of the game screen to draw the budget panel
- texture_budget_panel_y "450" // number of pixels from the top side of the game screen to draw the budget panel
- tf_arena_max_streak "3" // Teams will be scrambled if one team reaches this streak
- tf_arena_preround_time "10" // Length of the Pre-Round time
- tf_arena_round_time "0"
- tf_arena_use_queue "1" // Enables the spectator queue system for Arena.
- tf_escort_score_rate "1" // in points per second
- think_limit "10" // warning is printed if this is exceeded.
- thirdperson // Switch to thirdperson camera.
- thirdperson_mayamode // Switch to thirdperson Maya-like camera controls.
- thirdperson_platformer "0" // Player will aim in the direction they are moving.
- thirdperson_screenspace "0" // eg: left means screen-left
- threadpool_affinity "1" // Enable setting affinity
- threadpool_cycle_reserve // Cycles threadpool reservation by powers of 2
- threadpool_reserve "0" // Consume the specified number of threads in the thread pool
- threadpool_run_tests
- thread_test_tslist
- thread_test_tsqueue
- thumper_show_radius "0" // advisor will use her custom impact damage table.
- timedemo // Play a demo and report performance info.
- timedemoquit // and then exit
- timerefresh // Profile the renderer.
- toggle // or cycles through a set of values.
- toggleconsole // Show/hide the console.
- toggle_duck // Toggles duck
- toggle_zoom // Toggles zoom display
- tracer_extra "1"
- trace_report "0"
- turret_ground_damage_multiplier "8"
- tv_allow_camera_man "1" // Auto director allows spectators to become camera man
- tv_allow_static_shots "1" // Auto director uses fixed level cameras for shots
- tv_autorecord "0" // Automatically records all games as SourceTV demos.
- tv_autoretry "1" // Relay proxies retry connection after network timeout
- tv_chatgroupsize "0" // Set the default chat group size
- tv_chattimelimit "8" // Limits spectators to chat only every n seconds
- tv_clients // Shows list of connected SourceTV clients.
- tv_debug "0" // SourceTV debug info.
- tv_delay "30" // SourceTV broadcast delay in seconds
- tv_delaymapchange "0" // Delays map change until broadcast is complete
- tv_deltacache "2" // Enable delta entity bit stream cache
- tv_dispatchmode "1" // 2=always
- tv_enable "0" // Activates SourceTV on server.
- tv_maxclients "128" // Maximum client number on SourceTV server.
- tv_maxrate "8000" // 0 == unlimited
- tv_msg // Send a screen message to all clients.
- tv_name "0" // SourceTV host name
- tv_nochat "0" // Dont receive chat messages from other SourceTV spectators
- tv_overridemaster "0" // Overrides the SourceTV master root address.
- tv_password "0" // SourceTV password for all clients
- tv_port "27020" // Host SourceTV port
- tv_record // Starts SourceTV demo recording.
- tv_relay // Connect to SourceTV server and relay broadcast.
- tv_relaypassword "0" // SourceTV password for relay proxies
- tv_relayvoice "1" // 1=on
- tv_retry // Reconnects the SourceTV relay proxy.
- tv_snapshotrate "16" // Snapshots broadcasted per second
- tv_status // Show SourceTV server status.
- tv_stop // Stops the SourceTV broadcast.
- tv_stoprecord // Stops SourceTV demo recording.
- tv_test_retry // Tell test clients to reconnect
- tv_test_start // Starts the SourceTV test system
- tv_test_stop // Stops the SourceTV test system
- tv_timeout "30" // SourceTV connection timeout in seconds.
- tv_title "0" // Set title for SourceTV spectator UI
- tv_transmitall "0" // Transmit all entities (not only director view)
- ui_posedebug_fade_in_time "0" // Time during which a new pose activity layer is shown in green in +posedebug UI
- ui_posedebug_fade_out_time "0" // Time to keep a no longer active pose activity layer in red until removing it from +posedebug UI
- unbind // Unbind a key.
- unbindall // Unbind all keys.
- unbind_mac // Unbind a key on the Mac only.
- unpause // Unpause the game.
- upgrade_portalgun // Equips the player with a single portal portalgun. Use twice for a dual portal portalgun. Arguments: none
- use // Use a particular weapon Arguments: <weapon_name>
- user // Show user data.
- users // Show user info for players on server.
- user_context // Set a Rich Presence Context: user_context <context id> <context value>
- user_property // Set a Rich Presence Property: user_property <property id>
- vcollide_wireframe "0" // Render physics collision models in wireframe
- vcr_verbose "0" // Write extra information into .vcr file.
- vehicle_flushscript // Flush and reload all vehicle scripts
- version // Print version info string.
- vgui_drawfocus "0" // Report which panel is under the mouse.
- vgui_drawtree "0" // Draws the vgui panel hiearchy to the specified depth level.
- vgui_drawtree_bounds "0" // Show panel bounds.
- vgui_drawtree_clear
- vgui_drawtree_draw_selected "0" // Highlight the selected panel
- vgui_drawtree_freeze "0" // Set to 1 to stop updating the vgui_drawtree view.
- vgui_drawtree_hidden "0" // Draw the hidden panels.
- vgui_drawtree_panelalpha "0" // Show the panel alpha values in the vgui_drawtree view.
- vgui_drawtree_panelptr "0" // Show the panel pointer values in the vgui_drawtree view.
- vgui_drawtree_popupsonly "0" // Draws the vgui popup list in hierarchy(1) or most recently used(2) order.
- vgui_drawtree_render_order "0" // List the vgui_drawtree panels in render order.
- vgui_drawtree_visible "1" // Draw the visible panels.
- vgui_message_dialog_modal "1"
- vgui_togglepanel // show/hide vgui panel by name.
- viewanim_addkeyframe
- viewanim_create // viewanim_create
- viewanim_load // load animation from file
- viewanim_reset // reset view angles!
- viewanim_save // Save current animation to file
- viewanim_test // test view animation
- viewmodel_fov "54"
- violence_ablood "1" // Draw alien blood
- violence_agibs "1" // Show alien gib entities
- violence_hblood "1" // Draw human blood
- violence_hgibs "1" // Show human gib entities
- voice_avggain "0"
- voice_clientdebug "0"
- voice_debugfeedback "0"
- voice_debugfeedbackfrom "0"
- voice_dsound "0"
- voice_enable "1"
- voice_fadeouttime "0"
- voice_forcemicrecord "1"
- voice_inputfromfile "0" // Get voice input from voice_input.wav rather than from the microphone.
- voice_loopback "0"
- voice_maxgain "10"
- voice_modenable "1" // Enable/disable voice in this mod.
- voice_overdrive "2"
- voice_overdrivefadetime "0"
- voice_printtalkers // voice debug.
- voice_profile "0"
- voice_recordtofile "0" // Record mic data and decompressed voice data into voice_micdata.wav and voice_decompressed.wav
- voice_scale "1"
- voice_serverdebug "0"
- voice_showchannels "0"
- voice_showincoming "0"
- voice_steal "2"
- voice_writevoices "0" // Saves each speakers voice data into separate .wav files
- volume "1" // Sound volume
- voxeltree_box // Vector(max)>.
- voxeltree_playerview // View entities in the voxel-tree at the player position.
- voxeltree_sphere // float(radius)>.
- voxeltree_view // View entities in the voxel-tree.
- vox_reload // Reload sentences.txt file
- vprof // Toggle VProf profiler
- vprof_adddebuggroup1 // add a new budget group dynamically for debugging
- vprof_cachemiss // Toggle VProf cache miss checking
- vprof_cachemiss_off // Turn off VProf cache miss checking
- vprof_cachemiss_on // Turn on VProf cache miss checking
- vprof_child
- vprof_collapse_all // Collapse the whole vprof tree
- vprof_counters "0"
- vprof_dump_groupnames // Write the names of all of the vprof groups to the console.
- vprof_dump_oninterval "0" // Interval (in seconds) at which vprof will batch up data and dump it to the console.
- vprof_dump_spikes "0" // negative to reset after dump
- vprof_dump_spikes_budget_group "0" // Budget gtNode to start report from when doing a dump spikes
- vprof_dump_spikes_node "0" // Node to start report from when doing a dump spikes
- vprof_expand_all // Expand the whole vprof tree
- vprof_expand_group // Expand a budget group in the vprof tree by name
- vprof_generate_report // Generate a report to the console.
- vprof_generate_report_AI // Generate a report to the console.
- vprof_generate_report_AI_only // Generate a report to the console.
- vprof_generate_report_budget // Generate a report to the console based on budget group.
- vprof_generate_report_hierarchy // Generate a report to the console.
- vprof_generate_report_map_load // Generate a report to the console.
- vprof_graph "0" // Draw the vprof graph.
- vprof_graphheight "256"
- vprof_graphwidth "512"
- vprof_nextsibling
- vprof_off // Turn off VProf profiler
- vprof_on // Turn on VProf profiler
- vprof_parent
- vprof_playback_average // Average the next N frames.
- vprof_playback_start // Start playing back a recorded .vprof file.
- vprof_playback_step // step to the next tick.
- vprof_playback_stepback // step to the previous tick.
- vprof_playback_stop // Stop playing back a recorded .vprof file.
- vprof_prevsibling
- vprof_record_start // Start recording vprof data for playback later.
- vprof_record_stop // Stop recording vprof data
- vprof_remote_start // Request a VProf data stream from the remote server (requires authentication)
- vprof_remote_stop // Stop an existing remote VProf data request
- vprof_reset // Reset the stats in VProf profiler
- vprof_reset_peaks // Reset just the peak time in VProf profiler
- vprof_scope "0" // Set a specific scope to start showing vprof tree
- vprof_scope_entity_gamephys "0"
- vprof_scope_entity_thinks "0"
- vprof_unaccounted_limit "0" // number of milliseconds that a node must exceed to turn red in the vprof panel
- vprof_verbose "1" // Set to one to show average and peak times
- vprof_vtune_group // enable vtune for a particular vprof group (disable to disable)
- vprof_warningmsec "10" // Above this many milliseconds render the label red to indicate slow code.
- vtune // Controls VTunes sampling.
- v_centermove "0"
- v_centerspeed "500"
- v_ipitch_cycle "1"
- v_ipitch_level "0"
- v_iroll_cycle "0"
- v_iroll_level "0"
- v_iyaw_cycle "2"
- v_iyaw_level "0"
- wc_air_edit_further // moves position of air node crosshair and placement location further away from play
- wc_air_edit_nearer // moves position of air node crosshair and placement location nearer to from player
- wc_air_node_edit // toggles laying down or air nodes instead of ground nodes
- wc_create // creates a node where the player is looking if a node is allowed at that location for the currently select
- wc_destroy // destroys the node that the player is nearest to looking at. (The node will be highlighted by a red box).
- wc_destroy_undo // When in WC edit mode restores the last deleted node
- wc_link_edit
- weapon_showproficiency "0"
- wipe_nav_attributes // Clear all nav attributes of selected area.
- writeid // Writes a list of permanently-banned user IDs to banned_user.cfg.
- writeip // Save the ban list to banned_ip.cfg.
- x360_audio_english "0" // Keeps track of whether were forcing english in a localized language.
- x360_resolution_height "480" // This is only used for reference. Changing this value does nothing
- x360_resolution_interlaced "0" // This is only used for reference. Changing this value does nothing
- x360_resolution_widescreen_mode "0" // This is only used for reference. Changing this value does nothing
- x360_resolution_width "640" // This is only used for reference. Changing this value does nothing
- xbox_autothrottle "1"
- xbox_steering_deadzone "0"
- xbox_throttlebias "100"
- xbox_throttlespoof "200"
- xc_crouch_debounce "0"
- xc_crouch_range "0" // Percentarge [1..0] of joystick range to allow ducking within
- xc_uncrouch_on_jump "1" // Uncrouch when jump occurs
- xc_use_crouch_limiter "0" // Use the crouch limiting logic on the controller
- xload // Load a saved game from a 360 storage device.
- xlook
- xmove
- xsave // Saves current game to a 360 storage device.
- zombie_ambushdist "16000"
- zombie_basemax "100"
- zombie_basemin "100"
- zombie_changemax "0"
- zombie_changemin "0"
- zombie_decaymax "0"
- zombie_decaymin "0"
- zombie_moanfreq "1"
- zombie_stepfreq "4"
- zoom_sensitivity_ratio "1" // Additional mouse sensitivity scale factor applied when FOV is zoomed in.
- _autosave // Autosave
- _autosavedangerous // AutoSaveDangerous
- _bugreporter_restart // Restarts bug reporter .dll
- _fov "0" // Automates fov command to server.
- _resetgamestats // Erases current game stats and writes out a blank stats file
- _restart // Shutdown and restart the engine.